Cooker hood installation in Greater Manchester

What prompts cooker hood installation in Greater Manchester?

Homeowners in Greater Manchester adding a hob to a new island often need a ceiling hood with solid fixings and a duct route planned before the ceiling is closed up.

A new kitchen in a Greater Manchester home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

What does cooker hood installation in Greater Manchester include?

Your written quote lists everything included. For cooker hood installation, that normally means:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Short, straight runs of rigid ducting wherever the route allows
Island and ceiling hoods fixed into the ceiling structure by two people
Recirculating hoods fitted with carbon filters, and their limits explained
Power supply connected by an electrician and tested to BS 7671
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

How much does cooker hood installation cost in Greater Manchester?

The figures below are guide prices for Greater Manchester, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

How much does cooker hood installation cost in Greater Manchester?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes across Greater Manchester

Across Greater Manchester you will often find Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, and each shapes the kitchen differently. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.

A common terrace project is opening the back kitchen into the middle room to make a kitchen-diner. Converted mill and warehouse flats often have open-plan kitchens against exposed brick or concrete, which affects how units, shelves and extraction are fixed.

Rules for cooker hood installation in Greater Manchester

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you start

In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
If your Greater Manchester home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
For an island hood in your Greater Manchester kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.

Questions about cooker hood installation in Greater Manchester

How much does cooker hood installation cost in Greater Manchester?

Cooker hood installation in Greater Manchester typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Greater Manchester?

Yes. We carry out cooker hood installation across Greater Manchester, including Manchester, Oldham, Wigan and Bolton. Every job starts with a free survey visit and an itemised written quote.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in towns across Greater Manchester

Choose a town for local guide prices and postcode coverage:

Cooker hood installation in Greater Manchester

What prompts cooker hood installation in Greater Manchester?

What does cooker hood installation in Greater Manchester include?

How much does cooker hood installation cost in Greater Manchester?

Kitchens in homes across Greater Manchester

Rules for cooker hood installation in Greater Manchester

Before you start

Questions about cooker hood installation in Greater Manchester

Cooker hood installation in towns across Greater Manchester

Cooker hood installation in nearby areas

Book a free survey visit in Greater Manchester

Book a free survey visit