Kitchen Installers UK
0800 088 6341 Get a guide price

Cooker hood installation · England

Cooker hood installation in West Yorkshire

Our cooker hood installation work covers the whole of West Yorkshire, including Leeds, Bradford and Huddersfield.

Guide price£110 to £860
Towns covered28 towns, including Leeds
Timescale3 to 7 hours for most hoods
Get a guide price Book a free survey visit
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

Is cooker hood installation right for your West Yorkshire kitchen?

A new kitchen in a West Yorkshire home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

People in flats across West Yorkshire sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.

What does cooker hood installation in West Yorkshire include?

The exact scope is agreed after the survey, but a typical job in West Yorkshire covers:

  • Survey of the hob position, duct route, outside wall and any open-flued appliance
  • Hood fixed at the height set by the hood and hob manufacturers
  • Core drilling through the outside wall and an external grille fitted and sealed
  • Short, straight runs of rigid ducting wherever the route allows
  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Recirculating hoods fitted with carbon filters, and their limits explained
  • Power supply connected by an electrician and tested to BS 7671
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

How much does cooker hood installation cost in West Yorkshire?

Typical cooker hood installation prices for homes in West Yorkshire, including VAT and adjusted for Yorkshire and the Humber. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Yorkshire and the Humber are generally lower than in London and the South East, so these ranges are a little below the national guide.

How much does cooker hood installation cost in West Yorkshire?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes across West Yorkshire

You will find stone-built terraces, back-to-back houses, 1930s semis and converted mill flats throughout West Yorkshire. Back-to-backs often have a small kitchen at the front or in a corner of the living room, while 1930s semis usually have a separate kitchen at the rear.

Most of West Yorkshire has soft water, drawn largely from Pennine reservoirs, so limescale is less of a concern for taps and appliances. Steep hill streets, terraces with steps up to the door and mill flats with booked lifts can all affect how long worktops and tall units are delivered.

Space is tight in a back-to-back, so the kitchen often shares the main room and every cupboard has to earn its place. Stone terraces tend to have thick walls and uneven floors that need scribing and levelling before new units go in.

Rules for cooker hood installation in West Yorkshire

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed mill buildings and stone terraces in conservation areas, including the Saltaire World Heritage Site, may need consent for new vents or changes to historic features.

Before you start

  • In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
  • If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
  • Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
  • For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
  • Before choosing a hood for your West Yorkshire kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
  • Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.

Questions about cooker hood installation in West Yorkshire

How much does cooker hood installation cost in West Yorkshire?

Cooker hood installation in West Yorkshire typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Yorkshire and the Humber. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of West Yorkshire?

Yes. We carry out cooker hood installation across West Yorkshire, including Leeds, Bradford, Huddersfield and Wakefield. Every job starts with a free survey visit and an itemised written quote.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Cooker hood installation in towns across West Yorkshire

Choose a town for local guide prices and postcode coverage:

Cooker hood installation in nearby areas

Free survey visit

Book a free survey visit in West Yorkshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price