Kitchen Installers UK
0800 088 6341 Get a guide price

Cooker hood installation · England

Cooker hood installation in Lancashire

Homeowners and landlords across Lancashire can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.

Guide price£110 to £860
Towns covered21 towns, including Preston
Timescale3 to 7 hours for most hoods
Get a guide price Book a free survey visit
A fitter on a step ladder fixing a stainless steel chimney cooker hood above a hob, with ducting visible above

When does cooker hood installation make sense in Lancashire?

Some Lancashire households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

If condensation runs down the windows of your Lancashire kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run.

What does cooker hood installation in Lancashire include?

The exact scope is agreed after the survey, but a typical job in Lancashire covers:

  • Survey of the hob position, duct route, outside wall and any open-flued appliance
  • Hood fixed at the height set by the hood and hob manufacturers
  • Core drilling through the outside wall and an external grille fitted and sealed
  • Short, straight runs of rigid ducting wherever the route allows
  • Island and ceiling hoods fixed into the ceiling structure by two people
  • Recirculating hoods fitted with carbon filters, and their limits explained
  • Power supply connected by an electrician and tested to BS 7671
  • Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

How much does cooker hood installation cost in Lancashire?

The figures below are guide prices for Lancashire, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Costs across the North West tend to sit under UK averages, which these ranges reflect.

How much does cooker hood installation cost in Lancashire?
Typical projectGuide price
Like-for-like cooker hood swapSame position and ducting£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes across Lancashire

You will find stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows throughout Lancashire. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.

Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer. Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in.

Opening the back kitchen into the middle room is a common way to gain space in a mill-town terrace. Bungalows on the Fylde coast are often refitted for easier living, with better lighting, more drawers and appliances at a comfortable height.

Rules for cooker hood installation in Lancashire

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.

Before you start

  • Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
  • Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
  • For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
  • Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
  • For an island hood in your Lancashire kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
  • If your Lancashire home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.

Questions about cooker hood installation in Lancashire

How much does cooker hood installation cost in Lancashire?

For a like-for-like cooker hood swap, budget around £110 to £230 including VAT in Lancashire. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.

Do you cover the whole of Lancashire?

Yes. We carry out cooker hood installation across Lancashire, including Preston, Burnley, Blackburn and Blackpool. Every job starts with a free survey visit and an itemised written quote.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation in towns across Lancashire

Choose a town for local guide prices and postcode coverage:

Cooker hood installation in nearby areas

Free survey visit

Book a free survey visit in Lancashire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price