Cooker hood installation · Greater Manchester
Cooker hood installation in Ashton-under-Lyne
Need cooker hood installation in Ashton-under-Lyne? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.

What prompts cooker hood installation in Ashton-under-Lyne?
A new kitchen in an Ashton-under-Lyne home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.
If your Ashton-under-Lyne house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. If your home is in Ashton-under-Lyne or close by in Dukinfield or Stalybridge, the same survey, quote and fitting process applies.
What is included in the work?
Here is what usually goes into cooker hood installation, adjusted to your Ashton-under-Lyne kitchen after we have measured it:
- Island and ceiling hoods fixed into the ceiling structure by two people
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Recirculating hoods fitted with carbon filters, and their limits explained
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Core drilling through the outside wall and an external grille fitted and sealed
Guide prices for cooker hood installation in Ashton-under-Lyne
The figures below are guide prices for Ashton-under-Lyne, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£860 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£600 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
House types around Ashton-under-Lyne and what they mean for a kitchen
The housing mix across Greater Manchester includes Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, so no two kitchen fits are quite alike. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.
Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner. Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in.
Building regulations, electrics and gas in Ashton-under-Lyne
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.
Practical advice for Ashton-under-Lyne homeowners
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- If you live in a flat in Greater Manchester, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
- Before choosing a hood for your Ashton-under-Lyne kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
Questions about cooker hood installation in Ashton-under-Lyne
How much does cooker hood installation cost in Ashton-under-Lyne?
For a like-for-like cooker hood swap, budget around £110 to £230 including VAT in Ashton-under-Lyne. That reflects typical costs in the North West; we confirm the actual figure in writing once we have measured up.
Can you measure up in Ashton-under-Lyne before quoting?
Yes. Every quote starts with a free, no-obligation survey visit to your home in Ashton-under-Lyne. We measure the room, check the walls, floor and service positions, then send an itemised written quote.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Cooker hood installation in neighbouring towns
We also carry out cooker hood installation in these towns near Ashton-under-Lyne:
- Cooker hood installation in Dukinfield
- Cooker hood installation in Stalybridge
- Cooker hood installation in Droylsden
- Cooker hood installation in Denton
- Cooker hood installation in Hyde
- Cooker hood installation in Failsworth
- Cooker hood installation across Greater Manchester
Other kitchen work in Ashton-under-Lyne
- Kitchen refurbishment in Ashton-under-Lyne
- Kitchen worktop fitting in Ashton-under-Lyne
- Kitchen electrics in Ashton-under-Lyne
- Hob and oven installation in Ashton-under-Lyne
- Supply and fit kitchens in Ashton-under-Lyne
- Landlord and rental kitchens in Ashton-under-Lyne
- All kitchen services in Ashton-under-Lyne
