Cooker hood installation · Greater Manchester
Cooker hood installation in Ashton-in-Makerfield
Cooker hood installation in Ashton-in-Makerfield starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.
Is cooker hood installation right for your Ashton-in-Makerfield kitchen?
Some Ashton-in-Makerfield households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
If condensation runs down the windows of your Ashton-in-Makerfield kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. Kitchens in every part of Ashton-in-Makerfield are covered, and the survey visit is free wherever you are in Greater Manchester.
What is in a typical job?
Here is what usually goes into cooker hood installation, adjusted to your Ashton-in-Makerfield kitchen after we have measured it:
- Core drilling through the outside wall and an external grille fitted and sealed
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
- Hood fixed at the height set by the hood and hob manufacturers
- Island and ceiling hoods fixed into the ceiling structure by two people
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Recirculating hoods fitted with carbon filters, and their limits explained
How much does cooker hood installation cost in Ashton-in-Makerfield?
Use these ranges to plan your budget. They include VAT, reflect costs in the North West, and are firmed up once we have seen your Ashton-in-Makerfield kitchen. Costs across the North West tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£860 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£600 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes around Ashton-in-Makerfield
The housing mix across Greater Manchester includes Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses, so no two kitchen fits are quite alike. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.
Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.
Do you need approval for cooker hood installation in Ashton-in-Makerfield?
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.
Tips before you start
- Before choosing a hood for your Ashton-in-Makerfield kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
- For an island hood in your Ashton-in-Makerfield kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
- If your Ashton-in-Makerfield home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
Questions about cooker hood installation in Ashton-in-Makerfield
How much does cooker hood installation cost in Ashton-in-Makerfield?
Cooker hood installation in Ashton-in-Makerfield typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover all of Ashton-in-Makerfield?
Yes. We work across Ashton-in-Makerfield, including the WN4 postcode district, and nearby towns such as Golborne and Newton-le-Willows. Book a free survey visit and we will arrange a time that suits you.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Also covering nearby towns
We also carry out cooker hood installation in these towns near Ashton-in-Makerfield:
- Cooker hood installation in Golborne
- Cooker hood installation in Newton-le-Willows
- Cooker hood installation in St Helens
- Cooker hood installation in Wigan
- Cooker hood installation in Hindley
- Cooker hood installation in Leigh
- Cooker hood installation across Greater Manchester
More services for Ashton-in-Makerfield kitchens
- Kitchen plumbing in Ashton-in-Makerfield
- Landlord and rental kitchens in Ashton-in-Makerfield
- Flat-pack kitchen fitting in Ashton-in-Makerfield
- Supply and fit kitchens in Ashton-in-Makerfield
- Integrated appliance installation in Ashton-in-Makerfield
- Utility room fitting in Ashton-in-Makerfield
- All kitchen services in Ashton-in-Makerfield