Cooker hood installation in Middleton

Thinking about cooker hood installation in Middleton?

Some Middleton households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

Cooks across Greater Manchester who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead. Homes right across Middleton are covered, as are nearby places such as Chadderton, Heywood and the villages in between.

What does the job involve?

After the survey visit we write the scope down. For cooker hood installation in Middleton it usually covers:

Hood fixed at the height set by the hood and hob manufacturers
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Island and ceiling hoods fixed into the ceiling structure by two people
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained
Core drilling through the outside wall and an external grille fitted and sealed

Cooker hood installation prices in Middleton

The figures below are guide prices for Middleton, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Costs across the North West tend to sit under UK averages, which these ranges reflect.

Cooker hood installation prices in Middleton
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Middleton?

Typical homes in this part of Greater Manchester include Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Regulations for kitchen work in Middleton

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Before you book cooker hood installation in Middleton

For an island hood in your Middleton kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Before choosing a hood for your Middleton kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.

Questions about cooker hood installation in Middleton

How much does cooker hood installation cost in Middleton?

Cooker hood installation in Middleton typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Middleton do you work in?

All of them. Our Greater Manchester coverage takes in the whole of Middleton, including the M24 postcode district, as well as surrounding towns such as Chadderton. If you are unsure, send us your postcode.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Nearby places we cover

Neighbouring towns where we offer cooker hood installation: