Cooker hood installation in Saddleworth

What prompts cooker hood installation in Saddleworth?

If your Saddleworth house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.

If condensation runs down the windows of your Saddleworth kitchen whenever you cook, the hood may be recirculating, undersized or ducted through a long, flexible run. Kitchens in every part of Saddleworth are covered, and the survey visit is free wherever you are in Greater Manchester.

What does the job involve?

After the survey visit we write the scope down. For cooker hood installation in Saddleworth it usually covers:

Hood fixed at the height set by the hood and hob manufacturers
Island and ceiling hoods fixed into the ceiling structure by two people
Power supply connected by an electrician and tested to BS 7671
Core drilling through the outside wall and an external grille fitted and sealed
Survey of the hob position, duct route, outside wall and any open-flued appliance
Short, straight runs of rigid ducting wherever the route allows

Cooker hood installation prices in Saddleworth

Use these ranges to plan your budget. They include VAT, reflect costs in the North West, and are firmed up once we have seen your Saddleworth kitchen. Costs across the North West tend to sit under UK averages, which these ranges reflect.

Cooker hood installation prices in Saddleworth
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

Kitchens in homes around Saddleworth

Typical homes in this part of Greater Manchester include Victorian terraces, 1930s semis, converted mill and warehouse flats and post-war estate houses. Two-up two-down terraces often have a small back kitchen or a galley in the rear outrigger, while 1930s semis usually have a separate kitchen beside the dining room.

Terraced streets with back alleys, city-centre flats with booked lifts and permit parking can all affect delivery timing and how long worktops are carried in. Mains water across Greater Manchester is mostly soft, so limescale is less of a problem and taps and boiling water taps tend to stay cleaner.

Building regulations, electrics and gas in Saddleworth

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed mill conversions and homes in conservation areas may need consent for new external vents, and apartment owners usually need the freeholder's or managing agent's consent.

Getting the most from your cooker hood installation

For an island hood in your Saddleworth kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Before choosing a hood for your Saddleworth kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.

Questions about cooker hood installation in Saddleworth

How much does cooker hood installation cost in Saddleworth?

Guide prices in Saddleworth are about £110 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Saddleworth as well?

Yes. As well as Saddleworth itself, we cover the rest of Greater Manchester and nearby towns such as Oldham and Royton. The process is the same wherever the kitchen is.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Cooker hood installation near Saddleworth

We also carry out cooker hood installation in these towns near Saddleworth: