Cooker hood installation · England
Cooker hood installation in South Yorkshire
If you need cooker hood installation anywhere in South Yorkshire, we survey the kitchen, agree the scope with you and book every trade through to handover.
What prompts cooker hood installation in South Yorkshire?
If your South Yorkshire house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille.
Some South Yorkshire households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.
What does cooker hood installation in South Yorkshire include?
After the survey visit we write the scope down. For cooker hood installation in South Yorkshire it usually covers:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in South Yorkshire?
These guide ranges include VAT at 20% and are adjusted for prices in Yorkshire and the Humber. We confirm your price in writing after a free survey visit. Labour rates in Yorkshire and the Humber are generally lower than in London and the South East, so these ranges are a little below the national guide.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£860 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£600 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across South Yorkshire
You will find Victorian terraces, former pit village terraces, 1930s semis and post-war council-built houses throughout South Yorkshire. Sheffield's Victorian terraces often have a small kitchen behind the living room, while 1930s semis and post-war houses tend to have a compact kitchen beside the dining room.
Hardness varies across South Yorkshire: Sheffield's supply is generally soft, while some eastern areas are harder, so check with your supplier before choosing a filter. Steep hillside streets and terraces with steps up to the front door can make carrying long worktops and tall units harder, so access is checked at the survey.
Knocking a small back kitchen through to the living room is a common way to make a kitchen-diner in a terrace. Pit-village terraces and ex-council houses often need a full strip-out with new wiring, more sockets and an asbestos check before older floor tiles or boards are lifted.
Rules for cooker hood installation in South Yorkshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Parts of Sheffield and Barnsley lie within the Peak District National Park, and listed buildings or conservation areas elsewhere may need consent for new external vents.
Before you start
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- If you live in a flat in South Yorkshire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
- For an island hood in your South Yorkshire kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Questions about cooker hood installation in South Yorkshire
How much does cooker hood installation cost in South Yorkshire?
Cooker hood installation in South Yorkshire typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Yorkshire and the Humber. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of South Yorkshire?
Yes. We carry out cooker hood installation across South Yorkshire, including Sheffield, Rotherham, Doncaster and Barnsley. Every job starts with a free survey visit and an itemised written quote.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
How high should a cooker hood be above the hob?
At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.
Cooker hood installation in towns across South Yorkshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Sheffield
- Cooker hood installation in Rotherham
- Cooker hood installation in Doncaster
- Cooker hood installation in Barnsley
- Cooker hood installation in Chapeltown
- Cooker hood installation in Darton
- Cooker hood installation in Dinnington
- Cooker hood installation in Adwick le Street
- Cooker hood installation in Rawmarsh
- Cooker hood installation in Fulwood
- Cooker hood installation in Penistone