Cooker hood installation in Rawtenstall

Thinking about cooker hood installation in Rawtenstall?

Cooks across Lancashire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

If your Rawtenstall kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test. Homes right across Rawtenstall are covered, as are nearby places such as Accrington, Bury and the villages in between.

What we cover for cooker hood installation in Rawtenstall

Your written quote lists everything included. For cooker hood installation, that normally means:

Survey of the hob position, duct route, outside wall and any open-flued appliance
Core drilling through the outside wall and an external grille fitted and sealed
Hood fixed at the height set by the hood and hob manufacturers
Island and ceiling hoods fixed into the ceiling structure by two people
Short, straight runs of rigid ducting wherever the route allows
Recirculating hoods fitted with carbon filters, and their limits explained

Guide prices for cooker hood installation in Rawtenstall

These guide ranges include VAT at 20% and are adjusted for prices in the North West. We confirm your price in writing after a free survey visit. Prices in the North West usually come in below the national guide, as labour rates are lower than in the South East.

Guide prices for cooker hood installation in Rawtenstall
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Rawtenstall and what they mean for a kitchen

Typical homes in this part of Lancashire include stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.

Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer. Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in.

What rules apply to cooker hood installation in Rawtenstall?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.

Tips before you start

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
If you live in a flat in Lancashire, ask the freeholder, factor or managing agent about outside vents before you buy a ducted hood.
If your Rawtenstall home is listed, or in a building with strict rules on outside changes, check what is allowed before any hole is cut for a duct.
Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.

Questions about cooker hood installation in Rawtenstall

How much does cooker hood installation cost in Rawtenstall?

Cooker hood installation in Rawtenstall typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Which parts of Rawtenstall do you work in?

All of them. Our Lancashire coverage takes in the whole of Rawtenstall, including the BB4 postcode district, as well as surrounding towns such as Accrington. If you are unsure, send us your postcode.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Also covering nearby towns

We also carry out cooker hood installation in these towns near Rawtenstall: