Cooker hood installation in Blackpool

What prompts cooker hood installation in Blackpool?

A new kitchen in a Blackpool home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.

If your Blackpool house has thick solid walls, core drilling a neat hole for the duct takes the right equipment and careful positioning of the outside grille. Homes right across Blackpool are covered, as are nearby places such as Poulton-le-Fylde, Thornton-Cleveleys and the villages in between.

What is in a typical job?

Here is what usually goes into cooker hood installation, adjusted to your Blackpool kitchen after we have measured it:

Island and ceiling hoods fixed into the ceiling structure by two people
Core drilling through the outside wall and an external grille fitted and sealed
Hood fixed at the height set by the hood and hob manufacturers
Power supply connected by an electrician and tested to BS 7671
Recirculating hoods fitted with carbon filters, and their limits explained
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present

Cooker hood installation prices in Blackpool

The figures below are guide prices for Blackpool, including VAT and adjusted for typical costs across the North West. The fixed price comes after we have measured up. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Cooker hood installation prices in Blackpool
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Blackpool and what they mean for a kitchen

Typical homes in this part of Lancashire include stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.

Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer. Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in.

What rules apply to cooker hood installation in Blackpool?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.

Tips before you start

Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Check whether your Blackpool home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Blackpool

How much does cooker hood installation cost in Blackpool?

Guide prices in Blackpool are about £110 to £230 including VAT for a like-for-like cooker hood swap. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Blackpool do you work in?

All of them. Our Lancashire coverage takes in the whole of Blackpool, including the FY1 postcode district, as well as surrounding towns such as Poulton-le-Fylde. If you are unsure, send us your postcode.

Does a cooker hood need a hole in the wall?

A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

How high should a cooker hood be above the hob?

At least the minimum distance given by the manufacturers. Both the hood and the hob instructions set a minimum gap between them, and where they differ the greater figure should be used. Gas hobs usually need more clearance than induction. A hood fitted too low is a fire risk, while one fitted much higher than recommended captures less steam.

Cooker hood installation in neighbouring towns

Neighbouring towns where we offer cooker hood installation: