Cooker hood installation in Morecambe

What prompts cooker hood installation in Morecambe?

Cooks across Lancashire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.

A new kitchen in a Morecambe home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. Our Lancashire coverage reaches every part of Morecambe (LA4) and out towards Lancaster.

What does the job involve?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Hood fixed at the height set by the hood and hob manufacturers
Core drilling through the outside wall and an external grille fitted and sealed
Power supply connected by an electrician and tested to BS 7671
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Short, straight runs of rigid ducting wherever the route allows
Survey of the hob position, duct route, outside wall and any open-flued appliance

Cooker hood installation prices in Morecambe

As a starting point for Morecambe, these ranges include VAT at 20% and allow for typical labour costs in the North West. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

Cooker hood installation prices in Morecambe
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Morecambe?

Typical homes in this part of Lancashire include stone-built mill-town terraces, red-brick Victorian terraces, 1930s semis and seaside bungalows. Mill-town terraces often have a small back kitchen opening onto a yard, while seaside bungalows and 1930s semis tend to have a square kitchen at the rear.

Most of Lancashire has soft mains water, so heavy limescale is rare and taps, sinks and appliances stay cleaner for longer. Back alleys and yards can help with deliveries, though narrow yard gates and steep hill streets may limit how long worktops come in.

What rules apply to cooker hood installation in Morecambe?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Where an older town-centre home is listed or in a conservation area, a new vent on a front wall may need consent, and flats in converted houses usually need freeholder approval.

Worth knowing before the fit

Replace the carbon filters in a recirculating hood as often as the manufacturer advises, and clean the grease filters regularly so the hood keeps working well.
Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Check whether your Morecambe home has an open-flued boiler or gas fire, and mention it at the survey so a spillage test can be planned.
In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.

Questions about cooker hood installation in Morecambe

How much does cooker hood installation cost in Morecambe?

Cooker hood installation in Morecambe typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Morecambe?

Yes. We work across Morecambe, including the LA4 postcode district, and nearby towns such as Lancaster and Fleetwood. Book a free survey visit and we will arrange a time that suits you.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Also covering nearby towns

Neighbouring towns where we offer cooker hood installation: