Kitchen Installers UK

Splashbacks and tiling · England

Splashbacks and tiling in Shropshire

Our splashbacks and tiling work covers the whole of Shropshire, including Telford, Shrewsbury and Wellington.

Guide price£150 to £800
Towns covered8 towns, including Telford
Timescale1 to 2 days
A tiler setting white metro tiles as a splashback between a new worktop and the wall units above

Is splashbacks and tiling right for your Shropshire kitchen?

Landlords around Shropshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

When a Shropshire kitchen is getting stone worktops, upstands or a matching splashback are usually planned at the same time, so they are templated in one visit.

What do splashbacks and tiling in Shropshire include?

After the survey visit we write the scope down. For splashbacks and tiling in Shropshire it usually covers:

  • Free survey visit to check the walls, agree the layout and give an itemised quote
  • Old tiles removed and walls prepared, patched or boarded where needed
  • Tiled splashbacks between the worktop and wall units, set out from a centre line
  • Full-height or feature tiling behind the hob, sink or open shelving
  • Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
  • Stone upstands and splashbacks templated and fitted alongside a stone worktop
  • Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
  • Socket and switch plates refitted by an electrician once the tiling is finished

How much do splashbacks and tiling cost in Shropshire?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. Costs in the West Midlands sit close to the national guide.

How much do splashbacks and tiling cost in Shropshire?
Typical projectGuide price
Tiled splashbackBetween worktop and wall units£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in£250–£600
Stone upstands and splashbacksTemplated with the worktopPriced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes across Shropshire

Across Shropshire you will often find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, and each shapes the kitchen differently. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Telford's new-town houses often have small original kitchens, so owners may remove a partition to open them into the dining area. Rural farmhouses and cottages are frequently off the gas grid, so cooking may run on LPG, an oil-fired range or all-electric induction.

Rules for splashbacks and tiling in Shropshire

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Before you start

  • Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
  • Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
  • Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
  • Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.
  • If your Shropshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
  • Choosing stone worktops for a Shropshire kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.

Questions about splashbacks and tiling in Shropshire

How much do splashbacks and tiling cost in Shropshire?

Splashbacks and tiling in Shropshire typically cost £150 to £400 including VAT for a tiled splashback, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Shropshire?

Yes. We carry out splashbacks and tiling across Shropshire, including Telford, Shrewsbury, Wellington and Oswestry. Every job starts with a free survey visit and an itemised written quote.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Splashbacks and tiling in towns across Shropshire

Choose a town for local guide prices and postcode coverage:

Splashbacks and tiling in nearby areas

Free survey visit

Book a free survey visit in Shropshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price