Splashbacks and tiling · England
Splashbacks and tiling in Staffordshire
Splashbacks and tiling in Staffordshire start with a free visit to measure up, then a written scope and quote before any work begins.
Why splashbacks and tiling for a Staffordshire home?
If the kitchen in your Staffordshire home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units.
Landlords around Staffordshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.
What do splashbacks and tiling in Staffordshire include?
Your written quote lists everything included. For splashbacks and tiling, that normally means:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Staffordshire?
These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. For the West Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £150–£400 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £300–£800 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £250–£600 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Staffordshire
The housing mix across Staffordshire includes Victorian terraces, 1930s semis, post-war estate houses and moorland stone cottages, so no two kitchen fits are quite alike. Terraces in Stoke-on-Trent often have a small kitchen in the rear offshoot, while 1930s semis and estate houses tend to have a compact kitchen beside the dining room.
Water across much of Staffordshire is moderately hard to hard, so limescale on taps and boiling water taps is worth planning for. Terraced streets with limited parking and narrow moorland lanes in the north of the county can complicate deliveries, so vehicle size and timing are planned ahead.
Opening the back kitchen of a Potteries terrace into the middle room is a common way to create a kitchen-diner. Newer estate homes around Stafford, Lichfield and Tamworth more often need a straight replacement with integrated appliances and better lighting.
Rules for splashbacks and tiling in Staffordshire
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Homes within the Staffordshire part of the Peak District National Park, listed buildings and conservation areas may need consent for new vents or alterations to historic features.
Before you start
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- Toughened glass cannot be cut once it is made, so it is measured after the worktops are fixed and every socket position is final.
- Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
- Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Staffordshire home, as cutting dust and adhesive travel further than you expect.
Questions about splashbacks and tiling in Staffordshire
How much do splashbacks and tiling cost in Staffordshire?
Splashbacks and tiling in Staffordshire typically cost £150 to £400 including VAT for a tiled splashback, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Staffordshire?
Yes. We carry out splashbacks and tiling across Staffordshire, including Stoke-on-Trent, Newcastle-under-Lyme, Burton upon Trent and Cannock. Every job starts with a free survey visit and an itemised written quote.
Can heavy tiles or stone go on any kitchen wall?
Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.
Which grout and sealant are easiest to keep clean?
A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Splashbacks and tiling in towns across Staffordshire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Stoke-on-Trent
- Splashbacks and tiling in Newcastle-under-Lyme
- Splashbacks and tiling in Burton upon Trent
- Splashbacks and tiling in Cannock
- Splashbacks and tiling in Tamworth
- Splashbacks and tiling in Stafford
- Splashbacks and tiling in Lichfield
- Splashbacks and tiling in Kidsgrove
- Splashbacks and tiling in Burntwood
- Splashbacks and tiling in Longton
- Splashbacks and tiling in Rugeley
- Splashbacks and tiling in Leek
- Splashbacks and tiling in Great Wyrley