Splashbacks and tiling in Shrewsbury

Who usually needs splashbacks and tiling in Shrewsbury?

Homeowners in Shrewsbury often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

If your Shrewsbury home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from. We work throughout Shrewsbury (SY1) and across the wider Shropshire area.

What do splashbacks and tiling in Shrewsbury include?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Stone upstands and splashbacks templated and fitted alongside a stone worktop
Old tiles removed and walls prepared, patched or boarded where needed
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Full-height or feature tiling behind the hob, sink or open shelving
Socket and switch plates refitted by an electrician once the tiling is finished
Tiled splashbacks between the worktop and wall units, set out from a centre line

What do splashbacks and tiling cost in Shrewsbury?

The figures below are guide prices for Shrewsbury, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. Prices across the West Midlands are broadly in line with UK averages.

What do splashbacks and tiling cost in Shrewsbury?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

House types around Shrewsbury and what they mean for a kitchen

You will find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses throughout Shropshire. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Regulations for kitchen work in Shrewsbury

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Tips before you start

Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Keep the tile boxes until the job is finished and note the batch number, so matching replacements can be found if a tile cracks later.
Ask to see where the tiling will start before the first row goes on in your Shrewsbury kitchen, so narrow cut tiles end up in corners rather than on show.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Shrewsbury

How much do splashbacks and tiling cost in Shrewsbury?

Guide prices in Shrewsbury are about £150 to £400 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Shrewsbury before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Shrewsbury. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Splashbacks and tiling in neighbouring towns

Close to Shrewsbury? We cover these nearby towns too: