Splashbacks and tiling · England
Splashbacks and tiling in Worcestershire
We carry out splashbacks and tiling across Worcestershire, from Worcester to the smaller towns, with a free survey visit and an itemised written quote as standard.
When do splashbacks and tiling make sense in Worcestershire?
Landlords around Worcestershire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.
Homeowners in Worcestershire often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.
What do splashbacks and tiling in Worcestershire include?
The exact scope is agreed after the survey, but a typical job in Worcestershire covers:
- Free survey visit to check the walls, agree the layout and give an itemised quote
- Old tiles removed and walls prepared, patched or boarded where needed
- Tiled splashbacks between the worktop and wall units, set out from a centre line
- Full-height or feature tiling behind the hob, sink or open shelving
- Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
- Stone upstands and splashbacks templated and fitted alongside a stone worktop
- Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
- Socket and switch plates refitted by an electrician once the tiling is finished
How much do splashbacks and tiling cost in Worcestershire?
As a starting point for Worcestershire, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. For the West Midlands, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Tiled splashbackBetween worktop and wall units | £150–£400 |
| Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting | £300–£800 |
| Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in | £250–£600 |
| Stone upstands and splashbacksTemplated with the worktop | Priced with the worktop |
Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.
Kitchens in homes across Worcestershire
Across Worcestershire you will often find timber-framed cottages, Victorian villas and terraces, new town houses and 1930s semis, and each shapes the kitchen differently. In Redditch, new-town houses often have a compact galley, while Victorian villas in Malvern and terraces in Worcester tend to have separate kitchens behind the dining room.
Much of Worcestershire has moderately hard to hard water, so limescale on taps and boiling water taps is common, and a filter can help. Hillside streets, village lanes and town-centre terraces with limited parking can all slow deliveries, so the route for worktops is checked at the survey.
Removing a partition to open a small new-town kitchen into the dining area is a common change in Redditch. Timber-framed cottages in the villages often have low beams, uneven floors and walls that are rarely square, which shape where tall units, worktops and extraction can go.
Rules for splashbacks and tiling in Worcestershire
Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.
Listed timber-framed buildings and conservation areas, including parts of Worcester and Malvern, may need consent for new vents or alterations to historic features.
Before you start
- Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
- Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
- Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
- Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
- Hold a few of your chosen tiles against the wall in your Worcestershire kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
- If your Worcestershire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Questions about splashbacks and tiling in Worcestershire
How much do splashbacks and tiling cost in Worcestershire?
Splashbacks and tiling in Worcestershire typically cost £150 to £400 including VAT for a tiled splashback, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Worcestershire?
Yes. We carry out splashbacks and tiling across Worcestershire, including Worcester, Redditch, Kidderminster and Great Malvern. Every job starts with a free survey visit and an itemised written quote.
Can heavy tiles or stone go on any kitchen wall?
Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.
When are splashbacks fitted during a kitchen installation?
Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.
Can a glass splashback go behind a gas hob?
Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.
Splashbacks and tiling in towns across Worcestershire
Choose a town for local guide prices and postcode coverage:
- Splashbacks and tiling in Worcester
- Splashbacks and tiling in Redditch
- Splashbacks and tiling in Kidderminster
- Splashbacks and tiling in Great Malvern
- Splashbacks and tiling in Bromsgrove
- Splashbacks and tiling in Evesham
- Splashbacks and tiling in Droitwich
- Splashbacks and tiling in Stourport-on-Severn
- Splashbacks and tiling in Pershore