Splashbacks and tiling in Market Drayton

When do splashbacks and tiling make sense in Market Drayton?

If your Market Drayton home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

Homeowners in Market Drayton often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. We cover all of Market Drayton, including the TF9 postcode district, and travel out to neighbouring towns across Shropshire.

What does the job involve?

The exact scope is agreed after the survey, but a typical job in Market Drayton covers:

Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

Guide prices for splashbacks and tiling in Market Drayton

As a starting point for Market Drayton, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. Prices across the West Midlands are broadly in line with UK averages.

Guide prices for splashbacks and tiling in Market Drayton
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Market Drayton homes

The housing mix across Shropshire includes timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, so no two kitchen fits are quite alike. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Do you need approval for splashbacks and tiling in Market Drayton?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Getting the most from your splashbacks and tiling

If your Shropshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Ask to see where the tiling will start before the first row goes on in your Market Drayton kitchen, so narrow cut tiles end up in corners rather than on show.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Market Drayton

How much do splashbacks and tiling cost in Market Drayton?

Guide prices in Market Drayton are about £150 to £400 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Which parts of Market Drayton do you work in?

All of them. Our Shropshire coverage takes in the whole of Market Drayton, including the TF9 postcode district, as well as surrounding towns such as Whitchurch, Shropshire. If you are unsure, send us your postcode.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Nearby places we cover

We also carry out splashbacks and tiling in these towns near Market Drayton: