Splashbacks and tiling in Telford

Is splashbacks and tiling right for your Telford kitchen?

Homeowners in Telford often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

Landlords around Shropshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies. Homes right across Telford are covered, as are nearby places such as Wellington, Bridgnorth and the villages in between.

What does the job involve?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

Free survey visit to check the walls, agree the layout and give an itemised quote
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Tiled splashbacks between the worktop and wall units, set out from a centre line
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Socket and switch plates refitted by an electrician once the tiling is finished

Guide prices for splashbacks and tiling in Telford

Typical splashbacks and tiling prices for homes in Telford, including VAT and adjusted for the West Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. For the West Midlands, these ranges are close to the national figures.

Guide prices for splashbacks and tiling in Telford
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

What kind of kitchens do we fit in Telford?

In and around Telford, homes range across timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Regulations for kitchen work in Telford

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Planning ahead

Ask to see where the tiling will start before the first row goes on in your Telford kitchen, so narrow cut tiles end up in corners rather than on show.
If your Shropshire kitchen has a gas hob, check the hob instructions for splashback clearances before choosing glass or tiles for the wall behind it.
Choosing stone worktops for a Telford kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.

Questions about splashbacks and tiling in Telford

How much do splashbacks and tiling cost in Telford?

Guide prices in Telford are about £150 to £400 including VAT for a tiled splashback. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Telford as well?

Yes. As well as Telford itself, we cover the rest of Shropshire and nearby towns such as Wellington and Bridgnorth. The process is the same wherever the kitchen is.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Which grout and sealant are easiest to keep clean?

A darker or mid-tone grout in narrow joints is usually the easiest to keep looking clean in a kitchen, and an epoxy or stain-resistant grout helps behind the hob and sink. Where the tiles meet the worktop, a flexible sealant is used rather than grout, because that joint moves slightly. The sealant can be cut out and renewed later without disturbing the tiles.

Nearby places we cover

Neighbouring towns where we offer splashbacks and tiling: