Kitchen worktop fitting in Shrewsbury

Is kitchen worktop fitting right for your Shrewsbury kitchen?

When a Shrewsbury kitchen is about to be sold or let, new worktops and upstands can make the room look cared for without replacing any of the units.

Some homeowners across Shropshire have already ordered stone worktops from a supplier and need someone to fix and level the base units so templating can go ahead. We cover all of Shrewsbury, including the SY1 postcode district, and travel out to neighbouring towns across Shropshire.

What does kitchen worktop fitting in Shrewsbury include?

Here is what usually goes into kitchen worktop fitting, adjusted to your Shrewsbury kitchen after we have measured it:

Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Free survey visit to measure the runs and check the base units are level
Undermount sink and hob cut-outs cut and finished by the stone fabricator
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Quartz, granite or sintered stone templated once the base units are fixed and level
Matching upstands fitted and the joint to the wall sealed

Kitchen worktop fitting prices in Shrewsbury

Use these ranges to plan your budget. They include VAT, reflect costs in the West Midlands, and are firmed up once we have seen your Shrewsbury kitchen. Costs in the West Midlands sit close to the national guide.

Kitchen worktop fitting prices in Shrewsbury
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£500–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£900–£1,800
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,800–£3,500
Old worktops removed and taken awayMore for stone	£80–£250

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Shropshire includes timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses, so no two kitchen fits are quite alike. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Do you need approval for kitchen worktop fitting in Shrewsbury?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Practical advice for Shrewsbury homeowners

Keep a trivet beside the hob from the first day, whichever surface you choose; heat marks are hard to repair on most materials.
If your Shropshire home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
Check that full-length worktops can get into your Shrewsbury home; long lengths need a clear, straight route through the front door and hall.
Use trivets for hot pans on every type of worktop; sudden heat can scorch laminate and wood and mark or crack some stone.

Questions about kitchen worktop fitting in Shrewsbury

How much does kitchen worktop fitting cost in Shrewsbury?

Kitchen worktop fitting in Shrewsbury typically costs £500 to £1,200 including VAT for laminate worktops, supplied and fitted, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Shrewsbury?

Yes. We work across Shrewsbury, including the SY1 postcode district, and nearby towns such as Wellington and Telford. Book a free survey visit and we will arrange a time that suits you.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

How long does it take to fit new worktops?

Usually a day for laminate or solid wood in a typical kitchen, cut and jointed on site. Stone takes two visits: the fabricator templates once the base units are fixed and level, then cuts the worktops, the sink and hob openings and any drainer grooves, and fits them about one to two weeks later. In the meantime the sink is usually out of use, so plan meals around that gap.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Also covering nearby towns

The same service is available a short drive from Shrewsbury, including: