Flat-pack kitchen fitting in Shrewsbury

Why do people in Shrewsbury choose flat-pack kitchen fitting?

Some people in Shropshire start building their own flat-pack units, then call in a fitter when the walls, worktops and connections turn out to be the harder part.

If you have bought a flat-pack kitchen for your Shrewsbury home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen. Homes right across Shrewsbury are covered, as are nearby places such as Wellington, Telford and the villages in between.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Base units levelled on adjustable legs and fixed to the wall and to each other
Laminate worktops cut and jointed, with cut edges sealed around the sink
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Panels, plinths, sink, tap and appliance connections to existing points
Free survey visit to check the plan, the boxes and the room
Back panels fitted fully into their grooves or fixed as the instructions require

What does flat-pack kitchen fitting cost in Shrewsbury?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. Costs in the West Midlands sit close to the national guide.

What does flat-pack kitchen fitting cost in Shrewsbury?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,800–£3,000
Medium flat-pack kitchen, built and fittedAs above	£2,800–£4,200
Large flat-pack kitchen with tall units, built and fittedAs above	£4,000–£5,500

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

What kind of kitchens do we fit in Shrewsbury?

You will find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses throughout Shropshire. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier. Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance.

Regulations for kitchen work in Shrewsbury

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Before you book flat-pack kitchen fitting in Shrewsbury

Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Set aside a room next to the kitchen in your Shrewsbury home for assembly, with enough floor space to lay a tall larder carcass down flat.
Keep every instruction leaflet; each one shows the cam, dowel and hinge positions for that unit and saves time during assembly.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Shrewsbury

How much does flat-pack kitchen fitting cost in Shrewsbury?

Guide prices in Shrewsbury are about £1,800 to £3,000 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Shrewsbury as well?

Yes. As well as Shrewsbury itself, we cover the rest of Shropshire and nearby towns such as Wellington and Telford. The process is the same wherever the kitchen is.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

Are flat-pack wall units strong enough once they are hung?

Yes, when they are assembled and hung correctly. Wall units carry their load through the back panel and the hanging fixings, so the back must be fully fitted and the rail or brackets fixed into the wall with fixings that suit its construction. Plasterboard walls may need timber noggins or specialist fixings behind the board. We check the wall types at the survey and plan the fixings before the fit.

Nearby places we cover

Close to Shrewsbury? We cover these nearby towns too: