Flat-pack kitchen fitting in Market Drayton

Is flat-pack kitchen fitting right for your Market Drayton kitchen?

If you have bought a flat-pack kitchen for your Market Drayton home to keep costs down, careful assembly makes sure that saving never shows in the finished kitchen.

A Market Drayton kitchen with uneven floors or walls that are out of true needs the same care whatever the units, and flat-pack carcasses gain most from being squared before they are scribed. Kitchens in every part of Market Drayton are covered, and the survey visit is free wherever you are in Shropshire.

What is included in the work?

The exact scope is agreed after the survey, but a typical job in Market Drayton covers:

Back panels fitted fully into their grooves or fixed as the instructions require
Wall units hung on hanging rails or brackets fixed securely into the wall
Drawer boxes, runners and hinges assembled, fitted and adjusted to line up
Base units levelled on adjustable legs and fixed to the wall and to each other
Panels, plinths, sink, tap and appliance connections to existing points
Laminate worktops cut and jointed, with cut edges sealed around the sink

What does flat-pack kitchen fitting cost in Market Drayton?

As a starting point for Market Drayton, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. For the West Midlands, these ranges are close to the national figures.

What does flat-pack kitchen fitting cost in Market Drayton?
Typical project	Guide price
Small flat-pack kitchen, built and fittedCarcasses assembled on site, then fitted as a rigid kitchen would be	£1,800–£3,000
Medium flat-pack kitchen, built and fittedAs above	£2,800–£4,200
Large flat-pack kitchen with tall units, built and fittedAs above	£4,000–£5,500

Flat-pack prices include assembling the carcasses on site and fitting units, doors, panels, plinths and laminate worktops with connections to existing points; stone worktops, new circuits, moved services, tiling and flooring are extra. Prices include VAT at 20%.

Local homes and their kitchens

In and around Market Drayton, homes range across timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.

Do you need approval for flat-pack kitchen fitting in Market Drayton?

Assembling and fitting a flat-pack kitchen needs no planning permission in England; if the building is listed, listed building consent may be needed where the work affects its character. Electrics must meet BS 7671: extra sockets or spurs on an existing kitchen circuit are not notifiable, but a new cooker or induction circuit is notifiable under Part P. Gas hobs are connected only by Gas Safe registered engineers, and any new cooker hood should meet Approved Document F.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Worth knowing before the fit

If the flat-pack sink base in your Market Drayton kitchen sits beside a washing machine or dishwasher, ask for a sink base mat to protect the carcass floor.
Count the boxes against the delivery note when your flat-pack kitchen arrives in Market Drayton; orders can run to dozens of boxes and one short box can stall a fit.
Stack flat-pack boxes flat on a level floor rather than on end, so that long side panels do not bow before they are assembled.
Keep every bag of cam fittings, dowels and screws with its own box, as parts for different units often look almost identical.

Questions about flat-pack kitchen fitting in Market Drayton

How much does flat-pack kitchen fitting cost in Market Drayton?

Guide prices in Market Drayton are about £1,800 to £3,000 including VAT for a small flat-pack kitchen, built and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Market Drayton as well?

Yes. As well as Market Drayton itself, we cover the rest of Shropshire and nearby towns such as Whitchurch, Shropshire and Nantwich. The process is the same wherever the kitchen is.

Can you fit a flat-pack kitchen I have already started building?

Yes, usually. We check any carcasses you have assembled for square, tight joints and properly fitted back panels before they are used, and rebuild any that are not right. Units built in another room are moved carefully, as a carcass without its worktop and wall fixings is easy to twist out of shape. We look at them on the survey and price the work accordingly.

What is the difference between flat-pack and rigid kitchen units?

Rigid units arrive factory-assembled, usually glued and dowelled, so they are ready to fix. Flat-pack units arrive as boards and fittings in a box and are built on site. Both can make a good kitchen. Flat-pack is cheaper to buy and easier to carry into tight spaces, while rigid units save assembly time and come square from the factory, which is why the fitting labour is a little lower.

How do you protect a flat-pack sink unit from water?

Mainly by sealing. Cut edges of board near the sink, including the holes for pipes and the waste, are sealed before the unit is fitted, and the worktop cut-out is sealed before the sink goes in. A sink base mat adds a second layer of protection against drips. Isolation valves on the supplies also mean that a later leak can be shut off quickly.

Nearby places we cover

We also carry out flat-pack kitchen fitting in these towns near Market Drayton: