Splashbacks and tiling in Crewe

Is splashbacks and tiling right for your Crewe kitchen?

Landlords around Cheshire often prefer plain tiles with mid-grey grout or a glass panel, since both stand up to heavy use and are quick to clean between tenancies.

Homeowners in Crewe often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Homes right across Crewe are covered, as are nearby places such as Nantwich, Sandbach and the villages in between.

What do splashbacks and tiling in Crewe include?

Here is what usually goes into splashbacks and tiling, adjusted to your Crewe kitchen after we have measured it:

Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Tiled splashbacks between the worktop and wall units, set out from a centre line
Old tiles removed and walls prepared, patched or boarded where needed
Free survey visit to check the walls, agree the layout and give an itemised quote
Socket and switch plates refitted by an electrician once the tiling is finished
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint

What should you budget for splashbacks and tiling in Crewe?

As a starting point for Crewe, these ranges include VAT at 20% and allow for typical labour costs in the North West. Labour rates in the North West are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for splashbacks and tiling in Crewe?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£140–£380
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£280–£760
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£240–£570
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

In and around Crewe, homes range across Victorian terraces, 1930s semis, new-build estates and period farmhouses and cottages. Terraces in towns such as Crewe and Warrington often have a back-addition galley, while 1930s semis usually have a small kitchen that can be opened into a dining room.

Rural lanes and long farm drives can be awkward for delivery vans, and terraced streets in older town centres may have limited parking close to the door. Hardness varies across Cheshire, from fairly soft in some places to moderately hard in others, so check with your supplier before choosing a filter or boiling water tap.

What rules apply to splashbacks and tiling in Crewe?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Listed timber-framed buildings, homes in conservation areas such as central Chester and the Cheshire fringe of the Peak District National Park may need consent for new vents.

Worth knowing before the fit

Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Crewe home, as cutting dust and adhesive travel further than you expect.
Give fresh grout and sealant the full curing time shown on the packaging before scrubbing them or letting water sit on the joint at the back of the worktop.
Choosing stone worktops for a Crewe kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Order spare tiles from the same batch to cover cuts and breakages, and keep a few back so a later repair matches.

Questions about splashbacks and tiling in Crewe

How much do splashbacks and tiling cost in Crewe?

Splashbacks and tiling in Crewe typically cost £140 to £380 including VAT for a tiled splashback, based on prices in the North West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Crewe?

Yes. We work across Crewe, including the CW1 postcode district, and nearby towns such as Nantwich and Sandbach. Book a free survey visit and we will arrange a time that suits you.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling near Crewe

The same service is available a short drive from Crewe, including: