Hob and oven installation · Shropshire
Hob and oven installation in Market Drayton
Hob and oven installation for Market Drayton homes: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely. Every job starts with a free survey visit and a written quote.

When does hob and oven installation make sense in Market Drayton?
A new kitchen layout in Market Drayton sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
Many households in Market Drayton switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Kitchens in every part of Market Drayton are covered, and the survey visit is free wherever you are in Shropshire.
What is included in the work?
Here is what usually goes into hob and oven installation, adjusted to your Market Drayton kitchen after we have measured it:
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Old hob or oven disconnected safely and taken away for recycling
Guide prices for hob and oven installation in Market Drayton
Use these ranges to plan your budget. They include VAT, reflect costs in the West Midlands, and are firmed up once we have seen your Market Drayton kitchen. Prices across the West Midlands are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£300 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£250 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£400 |
| New gas pipe run to a new hob positionPipework, testing and making good | £250–£800 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Market Drayton homes
You will find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses throughout Shropshire. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.
Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.
What rules apply to hob and oven installation in Market Drayton?
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.
Worth knowing before the fit
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Shropshire.
- Before buying an induction hob for your Market Drayton home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
Questions about hob and oven installation in Market Drayton
How much does hob and oven installation cost in Market Drayton?
Guide prices in Market Drayton are about £120 to £300 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Which parts of Market Drayton do you work in?
All of them. Our Shropshire coverage takes in the whole of Market Drayton, including the TF9 postcode district, as well as surrounding towns such as Whitchurch, Shropshire. If you are unsure, send us your postcode.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Also covering nearby towns
We also carry out hob and oven installation in these towns near Market Drayton:
- Hob and oven installation in Whitchurch, Shropshire
- Hob and oven installation in Nantwich
- Hob and oven installation in Newcastle-under-Lyme
- Hob and oven installation in Crewe
- Hob and oven installation in Wellington
- Hob and oven installation in Stoke-on-Trent
- Hob and oven installation across Shropshire
