Kitchen worktop fitting in Market Drayton

Is kitchen worktop fitting right for your Market Drayton kitchen?

Homeowners in Market Drayton with sound units but worn, chipped or swollen laminate often replace just the worktops, keeping the rest of the kitchen as it is.

If your Shropshire kitchen still has a dated tiled or laminate surface, new worktops often go in with a new sink, tap and splashback at the same time. Kitchens in every part of Market Drayton are covered, and the survey visit is free wherever you are in Shropshire.

What we cover for kitchen worktop fitting in Market Drayton

After the survey visit we write the scope down. For kitchen worktop fitting in Market Drayton it usually covers:

Quartz, granite or sintered stone templated once the base units are fixed and level
Matching upstands fitted and the joint to the wall sealed
Old worktops removed and taken away, with the sink and hob disconnected safely
Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
Free survey visit to measure the runs and check the base units are level

Guide prices for kitchen worktop fitting in Market Drayton

Typical kitchen worktop fitting prices for homes in Market Drayton, including VAT and adjusted for the West Midlands. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices across the West Midlands are broadly in line with UK averages.

Guide prices for kitchen worktop fitting in Market Drayton
Typical project	Guide price
Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands	£500–£1,200
Solid wood worktops, supplied and fittedOiled before and after fitting	£900–£1,800
Granite, templated and fittedTemplate visit, cutting, delivery and fitting	£1,500–£3,200
Quartz, templated and fittedTemplate visit, cutting, delivery and fitting	£1,800–£3,500
Old worktops removed and taken awayMore for stone	£80–£250

Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.

Kitchens in homes around Market Drayton

You will find timber-framed cottages, Victorian terraces, post-war new town houses and farmhouses throughout Shropshire. Telford's new-town houses often have a compact galley or L-shaped kitchen, while older cottages in Shrewsbury and Ludlow may have small rooms with low beams.

Rural lanes, farm tracks and medieval town centres with restricted parking can all complicate deliveries, so vehicle size and timing are planned in advance. Much of Shropshire has moderately hard to hard water, so limescale on taps and boiling water taps is worth planning for; check with your supplier.

What rules apply to kitchen worktop fitting in Market Drayton?

New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.

Shrewsbury and Ludlow have many listed timber-framed buildings and conservation areas, so new vents or internal alterations may need listed building consent or planning permission.

Planning ahead

For a Market Drayton kitchen with stone worktops, ask whether the upstands will be cut from the same slab so the colour and pattern match.
Check that full-length worktops can get into your Market Drayton home; long lengths need a clear, straight route through the front door and hall.
Before templating day at your Market Drayton home, make sure the sink, tap and hob are on site so the stone can be cut to them.
Stone worktops are templated only once the base units are fixed and level, so allow one to two weeks between fitting and finishing.

Questions about kitchen worktop fitting in Market Drayton

How much does kitchen worktop fitting cost in Market Drayton?

For laminate worktops, supplied and fitted, budget around £500 to £1,200 including VAT in Market Drayton. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Which parts of Market Drayton do you work in?

All of them. Our Shropshire coverage takes in the whole of Market Drayton, including the TF9 postcode district, as well as surrounding towns such as Whitchurch, Shropshire. If you are unsure, send us your postcode.

How do I look after a solid wood worktop?

Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.

Will you fit stone worktops I have ordered myself?

Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.

Can I put hot pans on a quartz worktop?

It is safer not to. Quartz contains resin that can discolour or crack under sudden heat, so pans straight from the hob or oven should go on a trivet or pan stand. Granite copes better with heat but can still be marked or cracked by intense heat in one spot, and laminate and wood scorch easily. A trivet kept next to the hob protects any worktop.

Kitchen worktop fitting in neighbouring towns

We also carry out kitchen worktop fitting in these towns near Market Drayton: