Hob and oven installation in Totnes

Why do people in Totnes choose hob and oven installation?

If your Totnes kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

If the oven in your Totnes kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing. We work throughout Totnes (TQ9) and across the wider Devon area.

What we cover for hob and oven installation in Totnes

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Induction and ceramic hobs wired to a suitable cooker circuit and tested
Appliance models checked against worktop cut-outs, oven housings and existing supplies
Old hob or oven disconnected safely and taken away for recycling
Built-in single and double ovens fixed into housings with their ventilation gaps
Gas supply moved to a new hob position, with pipework tested and made good
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models

Guide prices for hob and oven installation in Totnes

The figures below are guide prices for Totnes, including VAT and adjusted for typical costs across the South West. The fixed price comes after we have measured up. Prices across the South West are broadly in line with UK averages.

Guide prices for hob and oven installation in Totnes
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Totnes

Typical homes in this part of Devon include cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Regulations for kitchen work in Totnes

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Before you book hob and oven installation in Totnes

If you are moving the hob in your Totnes kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
Before buying an induction hob for your Totnes home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Totnes

How much does hob and oven installation cost in Totnes?

Guide prices in Totnes are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Totnes as well?

Yes. As well as Totnes itself, we cover the rest of Devon and nearby towns such as Paignton and Torquay. The process is the same wherever the kitchen is.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Hob and oven installation near Totnes

Neighbouring towns where we offer hob and oven installation: