Hob and oven installation in Plymstock

Thinking about hob and oven installation in Plymstock?

If the oven in your Plymstock kitchen has failed, a like-for-like built-in replacement is usually a short job, provided the new model fits the existing housing.

Landlords in Devon replacing a worn cooker between tenancies need a safe gas connection or a suitable circuit, with the work properly recorded for their property files. We work throughout Plymstock (PL9) and across the wider Devon area.

What does hob and oven installation in Plymstock include?

Here is what usually goes into hob and oven installation, adjusted to your Plymstock kitchen after we have measured it:

Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Induction and ceramic hobs wired to a suitable cooker circuit and tested
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Gas supply moved to a new hob position, with pipework tested and made good
Old hob or oven disconnected safely and taken away for recycling
Built-in single and double ovens fixed into housings with their ventilation gaps

Hob and oven installation prices in Plymstock

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Plymstock kitchen. For the South West, these ranges are close to the national figures.

Hob and oven installation prices in Plymstock
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Plymstock?

In and around Plymstock, homes range across cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

What rules apply to hob and oven installation in Plymstock?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Before you book hob and oven installation in Plymstock

If your Plymstock home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
If you are moving the hob in your Plymstock kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Devon can be cut correctly by the fabricator.
A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.

Questions about hob and oven installation in Plymstock

How much does hob and oven installation cost in Plymstock?

For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Plymstock. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Can you measure up in Plymstock before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Plymstock. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Also covering nearby towns

The same service is available a short drive from Plymstock, including: