Kitchen underfloor heating in Totnes

Why do people in Totnes choose kitchen underfloor heating?

People planning a heat pump in Devon sometimes add underfloor heating to the kitchen at the same time, while the old floor is already up and the room is empty.

Kitchen-diners across Devon often have a large stretch of open floor, which can suit a wet system run from the existing boiler or heat pump. We cover all of Totnes, including the TQ9 postcode district, and travel out to neighbouring towns across Devon.

What is in a typical job?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

A survey of the subfloor, open floor area and existing heating system
Electric mats or cables, or wet pipework connected through a manifold
A heating layout drawn to the kitchen plan, clear of units and appliances
Screed, overlay boards or levelling compound, left to cure before finishes
Insulation boards so the floor responds more quickly when the heating comes on
Door thresholds and plinth heights checked against the new floor build-up

What does kitchen underfloor heating cost in Totnes?

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Totnes kitchen. For the South West, these ranges are close to the national figures.

What does kitchen underfloor heating cost in Totnes?
Typical project	Guide price
Electric underfloor heating, kitchen floorMat or cable system, insulation board and thermostat	£620–£1,500
Wet underfloor heating, kitchen floorPipes, manifold, screed or overlay boards	£1,500–£4,100
Plinth heater fitted under a base unitElectric or hydronic, where wall space is short	£260–£620

Guide prices cover the heating system, insulation boards, controls and connection with testing; the floor finish, subfloor repairs, a consumer unit upgrade and any boiler or heat pump changes are priced separately. Prices include VAT at 20%.

Fitting kitchens in older and newer Totnes homes

You will find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows throughout Devon. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Do you need approval for kitchen underfloor heating in Totnes?

In England, electric underfloor heating needs a supply and a thermostat. A new dedicated circuit is notifiable under Part P and is certified through a competent person scheme or building control, while a fused spur from an existing circuit is not notifiable in England but must still meet BS 7671 and be certified. A wet system is joined to your existing heating, and any work on a gas boiler is for a Gas Safe registered engineer.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Before you book kitchen underfloor heating in Totnes

Allow extra days in your Totnes kitchen plan for screed or levelling to cure before the tiler arrives, rather than squeezing it into the fit.
Keep rugs light in your Totnes kitchen-diner; heavy rugs and thick mats hold heat in the floor instead of letting it warm the room.
Ask for the floor sensor position to be recorded and the thermostat set to the finish's limits before the heating is first used in your Totnes kitchen.
Check the new floor build-up height early; it affects door thresholds, plinth heights and whether integrated appliances still fit under the worktop.

Questions about kitchen underfloor heating in Totnes

How much does kitchen underfloor heating cost in Totnes?

Kitchen underfloor heating in Totnes typically costs £620 to £1,500 including VAT for electric underfloor heating for a kitchen floor, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Totnes?

Yes. We work across Totnes, including the TQ9 postcode district, and nearby towns such as Paignton and Torquay. Book a free survey visit and we will arrange a time that suits you.

Which floor finishes work with underfloor heating?

Porcelain and ceramic tiles work well, because they conduct heat and cope with temperature changes. Luxury vinyl tiles and engineered wood can also be used, but their manufacturers set a maximum surface temperature, so the thermostat needs a floor sensor and a limit set to match. Thick underlays and rugs reduce the heat reaching the room, so check the finish's installation guidance before ordering.

Will underfloor heating raise my kitchen floor?

Usually, yes. An electric mat with insulation board and tile adhesive adds a modest height, while a wet system in screed adds more. The new level affects door thresholds, the gap under integrated appliances and plinth heights, so it is measured at the survey and the units are set to suit. Low-profile overlay boards can reduce the rise where height is tight.

Can underfloor heating go under kitchen units?

No, it is not usually laid under fitted units, plinths or appliances. Heat trapped beneath a cabinet or appliance can build up and damage the system or the floor, and it warms nothing useful. The heating layout follows the kitchen plan, covering the open floor, walkways and any dining area, which is why the units are set out before the heating goes down.

Kitchen underfloor heating in neighbouring towns

Neighbouring towns where we offer kitchen underfloor heating: