Hob and oven installation in Exmouth

Why hob and oven installation for an Exmouth home?

If your Exmouth kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.

Many households in Exmouth switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Our Devon coverage reaches every part of Exmouth (EX8) and out towards Exeter.

What does hob and oven installation in Exmouth include?

After the survey visit we write the scope down. For hob and oven installation in Exmouth it usually covers:

Appliance models checked against worktop cut-outs, oven housings and existing supplies
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
Old hob or oven disconnected safely and taken away for recycling
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Gas supply moved to a new hob position, with pipework tested and made good
Induction and ceramic hobs wired to a suitable cooker circuit and tested

What should you budget for hob and oven installation in Exmouth?

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. For the South West, these ranges are close to the national figures.

What should you budget for hob and oven installation in Exmouth?
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Exmouth

Across Devon you will often find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows, and each shapes the kitchen differently. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house. Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier.

Regulations for kitchen work in Exmouth

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Practical advice for Exmouth homeowners

Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Devon.
If your Exmouth home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
If you are replacing an old cooker with a separate hob and oven in your Exmouth kitchen, ask for the gas supply position and condition to be checked first.
If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.

Questions about hob and oven installation in Exmouth

How much does hob and oven installation cost in Exmouth?

Hob and oven installation in Exmouth typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover all of Exmouth?

Yes. We work across Exmouth, including the EX8 postcode district, and nearby towns such as Exeter and Newton Abbot. Book a free survey visit and we will arrange a time that suits you.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Nearby places we cover

The same service is available a short drive from Exmouth, including: