Kitchen Installers UK

Hob and oven installation · Devon

Hob and oven installation in Paignton

If you live in Paignton and need hob and oven installation, we can measure the room, send an itemised written quote and book every trade in the right order until the kitchen is handed over.

Guide price£120 to £820
Postcodes includeTQ3
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Paignton kitchen?

A new kitchen layout in Paignton sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Many households in Paignton switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Paignton sits about 26 miles east of Plymouth, and our Devon coverage takes in everything in between.

What does hob and oven installation in Paignton include?

Your written quote lists everything included. For hob and oven installation, that normally means:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested

How much does hob and oven installation cost in Paignton?

Use these ranges to plan your budget. They include VAT, reflect costs in the South West, and are firmed up once we have seen your Paignton kitchen. For the South West, these ranges are close to the national figures.

How much does hob and oven installation cost in Paignton?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£150–£410
New gas pipe run to a new hob positionPipework, testing and making good£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

House types around Paignton and what they mean for a kitchen

You will find cob and thatched cottages, Victorian terraces, post-war houses and flats and seaside bungalows throughout Devon. Victorian terraces in Exeter and Torbay often have a narrow back kitchen, while post-war houses and seaside bungalows usually have a square room that suits an L-shape.

Much of Devon has soft mains water, which is kind to taps and appliances, though some eastern parts are harder, so check with your supplier. Single-track lanes, steep town streets and cottages with no parking can make deliveries slow, so long worktops and tall units need a planned route into the house.

Regulations for kitchen work in Paignton

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Homes within Dartmoor or Exmoor national parks, listed thatched cottages and conservation areas may need consent before a new extractor vent goes through an outside wall.

Getting the most from your hob and oven installation

  • If you are replacing an old cooker with a separate hob and oven in your Paignton kitchen, ask for the gas supply position and condition to be checked first.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Devon can be cut correctly by the fabricator.
  • Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.

Questions about hob and oven installation in Paignton

How much does hob and oven installation cost in Paignton?

Guide prices in Paignton are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Paignton as well?

Yes. As well as Paignton itself, we cover the rest of Devon and nearby towns such as Torquay and Totnes. The process is the same wherever the kitchen is.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Nearby places we cover

Close to Paignton? We cover these nearby towns too:

More services for Paignton kitchens

Free survey visit

Book a free survey visit in Paignton

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price