Cooker hood installation · England
Cooker hood installation in North Yorkshire
Homeowners and landlords across North Yorkshire can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.

Is cooker hood installation right for your North Yorkshire kitchen?
Cooks across North Yorkshire who fry, grill or stir-fry often find a recirculating hood leaves smells in the house, and look at ducting the air outside instead.
A new kitchen in a North Yorkshire home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together.
What does cooker hood installation in North Yorkshire include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in North Yorkshire?
The figures below are guide prices for North Yorkshire, including VAT and adjusted for typical costs across Yorkshire and the Humber. The fixed price comes after we have measured up. Costs across Yorkshire and the Humber tend to sit under UK averages, which these ranges reflect.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £110–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £280–£860 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £280–£600 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £110–£280 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across North Yorkshire
Across North Yorkshire you will often find stone-built cottages, Victorian terraces, Georgian townhouses and post-war semis, and each shapes the kitchen differently. Dales and moorland stone cottages often have a small kitchen in a rear extension, while terraces in York and Middlesbrough tend to have a narrow back galley.
Water hardness varies across North Yorkshire, from soft in some upland areas to moderately hard elsewhere, so check with your supplier before choosing a filter. Dales and moorland roads can be narrow and steep, and older streets in York can have restricted parking, so delivery vehicles and timing need planning.
Thick walls and uneven floors mean units and worktops in a stone cottage usually need scribing and levelling. Victorian terraces in the towns often have a narrow galley that owners open into the dining room to make space for a table or peninsula.
Rules for cooker hood installation in North Yorkshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Homes in the Yorkshire Dales or North York Moors national parks, York's many listed buildings and conservation areas may need consent for new vents or internal changes.
Before you start
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.
- In a flat or a listed building, check what consents are needed before any hole is cut through an outside wall.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
- For an island hood in your North Yorkshire kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Questions about cooker hood installation in North Yorkshire
How much does cooker hood installation cost in North Yorkshire?
For a like-for-like cooker hood swap, budget around £110 to £230 including VAT in North Yorkshire. That reflects typical costs in Yorkshire and the Humber; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of North Yorkshire?
Yes. We carry out cooker hood installation across North Yorkshire, including York, Middlesbrough, Harrogate and Scarborough. Every job starts with a free survey visit and an itemised written quote.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Does a cooker hood need a hole in the wall?
A ducted hood does. The usual route is a core-drilled hole through the nearest outside wall, with rigid ducting from the hood and an external grille sealed into the wall. Where the hob is far from an outside wall, the duct can sometimes run above the wall units or through a ceiling void. A recirculating hood needs no hole, but it removes no moisture.
Cooker hood installation in towns across North Yorkshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in York
- Cooker hood installation in Middlesbrough
- Cooker hood installation in Harrogate
- Cooker hood installation in Scarborough
- Cooker hood installation in Redcar
- Cooker hood installation in Selby
- Cooker hood installation in Thornaby-on-Tees
- Cooker hood installation in Yarm
- Cooker hood installation in Northallerton
- Cooker hood installation in Ripon
- Cooker hood installation in Skipton
- Cooker hood installation in Whitby
- Cooker hood installation in Thirsk
- Cooker hood installation in Richmond, North Yorkshire
- Cooker hood installation in Malton
