Cooker hood installation · England
Cooker hood installation in Derbyshire
Homeowners and landlords across Derbyshire can book us for cooker hood installation: ducted and recirculating cooker hoods fitted, with wall core drilling, ducting and an external grille.
Why do people in Derbyshire choose cooker hood installation?
If your Derbyshire kitchen has an older open-flued boiler, fitting a stronger hood needs care, as it can affect the flue and should be followed by a spillage test.
People in flats across Derbyshire sometimes rely on recirculating hoods because an outside vent needs consent from the building's owners, and want to know what else improves ventilation.
What does cooker hood installation in Derbyshire include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Survey of the hob position, duct route, outside wall and any open-flued appliance
- Hood fixed at the height set by the hood and hob manufacturers
- Core drilling through the outside wall and an external grille fitted and sealed
- Short, straight runs of rigid ducting wherever the route allows
- Island and ceiling hoods fixed into the ceiling structure by two people
- Recirculating hoods fitted with carbon filters, and their limits explained
- Power supply connected by an electrician and tested to BS 7671
- Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
How much does cooker hood installation cost in Derbyshire?
As a starting point for Derbyshire, these ranges include VAT at 20% and allow for typical labour costs in the East Midlands. Prices across the East Midlands are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Like-for-like cooker hood swapSame position and ducting | £120–£230 |
| New ducted hood through an outside wallCore drilling, ducting run and external grille | £290–£870 |
| Island or ceiling hood installedTwo-person install, fixings to the ceiling structure | £290–£610 |
| Recirculating hood fittedNo ducting; carbon filters need replacing | £120–£290 |
Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.
Kitchens in homes across Derbyshire
You will find gritstone and limestone cottages, Victorian terraces, 1930s semis and former mining village terraces throughout Derbyshire. Terraces in Derby and Chesterfield often have a long galley behind the back room, while stone cottages in the Peak District may have a small kitchen in a rear extension.
Water hardness varies across Derbyshire, so check with your supplier; where it is harder, limescale on taps and boiling water taps is worth planning for. Steep hill villages and narrow lanes can limit delivery vehicles, while terraced streets in the towns may have little parking near the front door.
Former mining-village terraces often have a small back kitchen, and owners frequently open it into the living space to make a family room. Stone cottages tend to have walls that need scribing and floors that may need levelling before units go in.
Rules for cooker hood installation in Derbyshire
In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.
Homes in the Peak District National Park, listed buildings and conservation areas may need consent for a new vent on a visible wall or alterations to historic features.
Before you start
- Keep the duct run short and straight with rigid ducting, because every bend and extra metre of flexible hose reduces how much air the hood moves.
- If the kitchen has an open-flued boiler or gas fire, a Gas Safe registered engineer should carry out a spillage test after the hood is fitted.
- Check the minimum height above the hob in both the hood and hob instructions, and use the greater of the two figures.
- Choose ducted extraction where you can; a recirculating hood filters grease and smells but leaves the moisture from cooking in the room.
- Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
- For an island hood in your Derbyshire kitchen, settle the hood position before the ceiling is boarded, so timber supports can be added in the right place.
Questions about cooker hood installation in Derbyshire
How much does cooker hood installation cost in Derbyshire?
Cooker hood installation in Derbyshire typically costs £120 to £230 including VAT for a like-for-like cooker hood swap, based on prices in the East Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover the whole of Derbyshire?
Yes. We carry out cooker hood installation across Derbyshire, including Derby, Chesterfield, Long Eaton and Ilkeston. Every job starts with a free survey visit and an itemised written quote.
Can a ducted cooker hood be fitted in a flat?
Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.
Should I choose a ducted or a recirculating cooker hood?
A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.
Why might a cooker hood need a spillage test?
Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.
Cooker hood installation in towns across Derbyshire
Choose a town for local guide prices and postcode coverage:
- Cooker hood installation in Derby
- Cooker hood installation in Chesterfield
- Cooker hood installation in Long Eaton
- Cooker hood installation in Ilkeston
- Cooker hood installation in Swadlincote
- Cooker hood installation in Staveley
- Cooker hood installation in Belper
- Cooker hood installation in Heanor
- Cooker hood installation in Alfreton
- Cooker hood installation in Dronfield
- Cooker hood installation in Ripley
- Cooker hood installation in Buxton
- Cooker hood installation in Matlock
- Cooker hood installation in Ashbourne