Cooker hood installation in Ilkley

Why do people in Ilkley choose cooker hood installation?

Some Ilkley households simply want a quieter, more effective hood after years of a noisy one that barely clears the steam above a busy family hob.

A new kitchen in an Ilkley home can move the hob away from the old vent, so the hood, the duct run and the wall grille all need rethinking together. Our West Yorkshire coverage reaches every part of Ilkley (LS29) and out towards Keighley.

What does cooker hood installation in Ilkley include?

Here is what usually goes into cooker hood installation, adjusted to your Ilkley kitchen after we have measured it:

Core drilling through the outside wall and an external grille fitted and sealed
Power supply connected by an electrician and tested to BS 7671
Spillage test by a Gas Safe registered engineer where an open-flued appliance is present
Survey of the hob position, duct route, outside wall and any open-flued appliance
Recirculating hoods fitted with carbon filters, and their limits explained
Island and ceiling hoods fixed into the ceiling structure by two people

What should you budget for cooker hood installation in Ilkley?

Typical cooker hood installation prices for homes in Ilkley, including VAT and adjusted for Yorkshire and the Humber. Your own figure depends on the size of the kitchen, the layout and what is moving. Labour rates in Yorkshire and the Humber are generally lower than in London and the South East, so these ranges are a little below the national guide.

What should you budget for cooker hood installation in Ilkley?
Typical project	Guide price
Like-for-like cooker hood swapSame position and ducting	£110–£230
New ducted hood through an outside wallCore drilling, ducting run and external grille	£280–£860
Island or ceiling hood installedTwo-person install, fixings to the ceiling structure	£280–£600
Recirculating hood fittedNo ducting; carbon filters need replacing	£110–£280

Guide ranges cover fitting and connection with standard ducting through a straightforward wall; long or concealed duct runs, ceiling repairs, new electrical spurs, spillage tests and the hood itself are priced separately. Prices include VAT at 20%.

House types around Ilkley and what they mean for a kitchen

The housing mix across West Yorkshire includes stone-built terraces, back-to-back houses, 1930s semis and converted mill flats, so no two kitchen fits are quite alike. Back-to-backs often have a small kitchen at the front or in a corner of the living room, while 1930s semis usually have a separate kitchen at the rear.

Most of West Yorkshire has soft water, drawn largely from Pennine reservoirs, so limescale is less of a concern for taps and appliances. Steep hill streets, terraces with steps up to the door and mill flats with booked lifts can all affect how long worktops and tall units are delivered.

What rules apply to cooker hood installation in Ilkley?

In England, Approved Document F guidance for kitchen extract is about 30 litres per second from a cooker hood extracting outside, or 60 litres per second from a fan elsewhere in the room. A recirculating hood does not remove moisture, so another means of extract is usually needed. A new vent through the outside wall of a flat may need planning permission and the freeholder's consent, and an open-flued gas appliance in the room calls for a spillage test.

Listed mill buildings and stone terraces in conservation areas, including the Saltaire World Heritage Site, may need consent for new vents or changes to historic features.

Tips before you start

Ask for rigid ducting rather than flexible hose wherever the route allows, as it moves more air, gathers less grease and is usually quieter.
Choose a hood at least as wide as your hob, and compare its stated extraction rate with the size of the room before you buy.
Before choosing a hood for your Ilkley kitchen, find the nearest outside wall to the hob, because the shorter the duct run, the better the extraction.
For an island or ceiling hood, find out what is above the ceiling, as joists or added timbers are needed to carry the weight securely.

Questions about cooker hood installation in Ilkley

How much does cooker hood installation cost in Ilkley?

Cooker hood installation in Ilkley typically costs £110 to £230 including VAT for a like-for-like cooker hood swap, based on prices in Yorkshire and the Humber. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you work near Ilkley as well?

Yes. As well as Ilkley itself, we cover the rest of West Yorkshire and nearby towns such as Keighley and Bingley. The process is the same wherever the kitchen is.

Why might a cooker hood need a spillage test?

Because a hood pulling air out of a room can draw fumes back down the flue of an open-flued gas appliance, such as some older boilers or gas fires. Where the kitchen, or a room open to it, has one, a Gas Safe registered engineer should carry out a spillage test with the hood running at full speed. Room-sealed boilers are not affected in the same way.

Should I choose a ducted or a recirculating cooker hood?

A ducted hood is usually more effective, because it takes steam, smoke and smells outside. A recirculating hood passes air through grease and carbon filters and returns it to the room, so it deals with grease and smells but not moisture, and another means of extract is usually needed. Recirculating suits kitchens with no practical duct route, and its carbon filters need replacing.

Can a ducted cooker hood be fitted in a flat?

Often, but check consents first. A new vent through the outside wall of a flat may need planning permission and the freeholder's written consent, and some leases do not allow it at all. Where an outside vent is not possible, a recirculating hood can be fitted, with a separate extract fan or other ventilation dealing with moisture. Listed buildings may also need listed building consent.

Also covering nearby towns

We also carry out cooker hood installation in these towns near Ilkley: