Utility room fitting · England
Utility room fitting in West Sussex
Utility room fitting in West Sussex starts with a free visit to measure up, then a written scope and quote before any work begins.
Thinking about utility room fitting in West Sussex?
Larger households in West Sussex sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding.
Dog owners and keen walkers around West Sussex often ask for a utility with a deep sink, a coat cupboard and somewhere to leave muddy boots and wet jackets.
What does utility room fitting in West Sussex include?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to check water, waste, power and outside wall positions
- Base, wall and tall units fitted, levelled and fixed to the wall
- Worktop over the washing machine and dryer, supported clear of the appliances
- Washing machine supply, waste and isolation valve, tested for leaks
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
- Extract fan fitted to clear moisture from washing and drying
How much does utility room fitting cost in West Sussex?
As a starting point for West Sussex, these ranges include VAT at 20% and allow for typical labour costs in the South East. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,400–£3,400 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,400–£8,000 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £460–£1,200 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
Kitchens in homes across West Sussex
You will find 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows throughout West Sussex. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.
West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.
Seaside bungalow owners often open the kitchen into the dining room and refit it for easier everyday use. New-town houses tend to have small kitchens where taller wall units, integrated appliances and a better layout help make the most of the space.
Rules for utility room fitting in West Sussex
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.
Before you start
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
- A utility in a garage needs to be dry, lit and kept above freezing already; converting the garage itself is a separate building job.
- Stacking the dryer on the washing machine saves width, but it needs a stacking kit that suits both machines and enough height for the pair.
- Check which dryer you have: a vented dryer needs a duct to an outside wall, while condenser and heat pump dryers need emptying or a drain.
- Ask for an isolation valve on the washing machine supply that can be reached without pulling the machine out from under the worktop.
- Leave room behind the washing machine for the hoses; pushing it hard against the wall can kink them and stop the water draining properly.
Questions about utility room fitting in West Sussex
How much does utility room fitting cost in West Sussex?
For fitting three to six utility units and a worktop you have bought, budget around £1,400 to £3,400 including VAT in West Sussex. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of West Sussex?
Yes. We carry out utility room fitting across West Sussex, including Crawley, Worthing, Bognor Regis and Littlehampton. Every job starts with a free survey visit and an itemised written quote.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Utility room fitting in towns across West Sussex
Choose a town for local guide prices and postcode coverage:
- Utility room fitting in Crawley
- Utility room fitting in Worthing
- Utility room fitting in Bognor Regis
- Utility room fitting in Littlehampton
- Utility room fitting in Horsham
- Utility room fitting in Haywards Heath
- Utility room fitting in Chichester
- Utility room fitting in Burgess Hill
- Utility room fitting in East Grinstead
- Utility room fitting in Shoreham-by-Sea
- Utility room fitting in Lancing
- Utility room fitting in Midhurst