Utility room fitting · West Sussex
Utility room fitting in Horsham
Need utility room fitting in Horsham? Tell us about the kitchen and we will arrange a free, no-obligation survey to see what the job really involves.
What prompts utility room fitting in Horsham?
When a new kitchen is being planned in West Sussex, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself.
Larger households in Horsham sharing a lot of laundry often want a stacked washer and dryer, a hanging rail and a clear worktop for folding. Our West Sussex coverage reaches every part of Horsham (RH12) and out towards Crawley.
What is in a typical job?
Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:
- Free survey visit to check water, waste, power and outside wall positions
- Stacking kit fitted where the washer and dryer sit one above the other
- Washing machine supply, waste and isolation valve, tested for leaks
- Extract fan fitted to clear moisture from washing and drying
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Base, wall and tall units fitted, levelled and fixed to the wall
How much does utility room fitting cost in Horsham?
Use these ranges to plan your budget. They include VAT, reflect costs in the South East, and are firmed up once we have seen your Horsham kitchen. Expect costs in the South East to sit somewhat above UK averages, reflecting local labour rates.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,400–£3,400 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,400–£8,000 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £460–£1,200 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
What kind of kitchens do we fit in Horsham?
Typical homes in this part of West Sussex include 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.
West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.
Do you need approval for utility room fitting in Horsham?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.
Before you book utility room fitting in Horsham
- Before choosing a dryer for your Horsham utility, check whether there is an outside wall close enough for a short, straight vent duct.
- Measure the washer and dryer heights, including any stacking kit, before ordering wall units or shelves to go above them.
- If the utility will be in the garage of your Horsham home, make sure the space stays above freezing in winter for the pipes and machines.
- A worktop over appliances needs support at each side and a gap above the machines, so they can be slid out for servicing.
Questions about utility room fitting in Horsham
How much does utility room fitting cost in Horsham?
Guide prices in Horsham are about £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Which parts of Horsham do you work in?
All of them. Our West Sussex coverage takes in the whole of Horsham, including the RH12 postcode district, as well as surrounding towns such as Crawley. If you are unsure, send us your postcode.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Does a condenser or heat pump dryer need an outside vent?
No. Condenser and heat pump dryers do not need an outside vent, so they can go where a vented dryer cannot. They collect water in a container that has to be emptied, or they can be connected to the waste so they drain automatically, which is easy when the dryer sits beside the washing machine. They still give off some warmth, so the space needs air around it. A vented dryer needs a duct to an outside wall.
Utility room fitting near Horsham
The same service is available a short drive from Horsham, including:
- Utility room fitting in Crawley
- Utility room fitting in Horley
- Utility room fitting in Haywards Heath
- Utility room fitting in Burgess Hill
- Utility room fitting in Reigate
- Utility room fitting in Redhill
- Utility room fitting across West Sussex