Utility room fitting · West Sussex
Utility room fitting in Littlehampton
Homeowners and landlords in Littlehampton can book us for utility room fitting: utility rooms fitted with units, a sink, washer and dryer connections and a worktop over the appliances.
Why utility room fitting for a Littlehampton home?
If your Littlehampton home has a back lobby or a rear porch with a little spare width, a few units and a stacked washer and dryer can make it a working utility.
When a new kitchen is being planned in West Sussex, moving the laundry to a utility often makes room for deep drawers or a dishwasher in the kitchen itself. Littlehampton sits about 26 miles south-west of Crawley, and our West Sussex coverage takes in everything in between.
What we cover for utility room fitting in Littlehampton
Here is what usually goes into utility room fitting, adjusted to your Littlehampton kitchen after we have measured it:
- A vent to outside for a vented dryer, or a drain hose for condenser models
- Worktop over the washing machine and dryer, supported clear of the appliances
- Base, wall and tall units fitted, levelled and fixed to the wall
- Free survey visit to check water, waste, power and outside wall positions
- Stacking kit fitted where the washer and dryer sit one above the other
- Utility sink and tap plumbed in, with new supplies and waste where none exist
How much does utility room fitting cost in Littlehampton?
The figures below are guide prices for Littlehampton, including VAT and adjusted for typical costs across the South East. The fixed price comes after we have measured up. Labour in the South East generally costs more than the UK average, which lifts these ranges a little.
| Typical project | Guide price |
|---|---|
| Utility units and worktop fitted (fit only)Three to six units, laminate worktop, panels | £1,400–£3,400 |
| Utility room supplied and fittedUnits, worktop, sink, washer and dryer connections | £3,400–£8,000 |
| New utility plumbing for a sink and washing machineSupplies, waste and valves where none exist | £460–£1,200 |
Fit-only and supply-and-fit ranges cover units, worktop and standard sink and appliance connections, with new plumbing where none exists as a separate line; extract fans, dryer vents and new circuits are quoted on top. Prices include VAT at 20%.
House types around Littlehampton and what they mean for a kitchen
In and around Littlehampton, homes range across 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.
West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.
What rules apply to utility room fitting in Littlehampton?
Fitting a utility room needs no planning permission in England, though a new dryer vent through the outside wall of a flat may need planning permission and the freeholder's consent. Adding sockets to an existing circuit is not notifiable, but a new circuit is, under Part P. Approved Document F sets an extract rate of about 30 litres per second for a utility room, so a new fan should be sized to meet it, and if an open-flued boiler shares the room, a Gas Safe registered engineer should carry out a spillage test once a fan is fitted.
Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.
Before you book utility room fitting in Littlehampton
- In a Littlehampton flat, check with the freeholder before a new dryer vent or extract fan is cut through an outside wall.
- Before choosing a dryer for your Littlehampton utility, check whether there is an outside wall close enough for a short, straight vent duct.
- If your West Sussex home has an open-flued boiler in the utility, ask for a spillage test by a Gas Safe registered engineer once an extract fan goes in.
- If there is no water or waste in the space, new plumbing has to reach it, which is simplest close to an existing kitchen or bathroom.
Questions about utility room fitting in Littlehampton
How much does utility room fitting cost in Littlehampton?
Guide prices in Littlehampton are about £1,400 to £3,400 including VAT for fitting three to six utility units and a worktop you have bought. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Which parts of Littlehampton do you work in?
All of them. Our West Sussex coverage takes in the whole of Littlehampton, including the BN17 postcode district, as well as surrounding towns such as Bognor Regis. If you are unsure, send us your postcode.
Can a worktop go over a washing machine and dryer?
Yes, and it is one of the most common utility layouts. The worktop is supported by units, end panels or a rail at each side rather than resting on the machines, with a small gap above them for vibration and so they can be slid out for servicing. Standard front-loading machines usually fit under a standard-height worktop, but we check the appliance heights against the plan first.
Does a utility room need an extractor fan?
Yes, in most cases. Washing and drying put a lot of moisture into a small space, so extract ventilation is strongly advised: Approved Document F sets a rate of about 30 litres per second for utility rooms in England and Wales, and the building standards in Scotland and Technical Booklet K in Northern Ireland cover ventilation too. An extract fan ducted outside is the usual answer, with a window helping but not replacing it. A vented dryer needs its own duct as well.
Can a utility room go in a garage or under the stairs?
Often, yes, as long as the space already exists and is usable. In a garage it needs to be dry and protected from frost, with power and a route for water and waste. Under the stairs, check the headroom, the ventilation and whether a door can open fully. We fit units and connect appliances in existing spaces; converting a garage into a habitable room is a separate building project.
Nearby places we cover
Close to Littlehampton? We cover these nearby towns too:
- Utility room fitting in Bognor Regis
- Utility room fitting in Worthing
- Utility room fitting in Lancing
- Utility room fitting in Chichester
- Utility room fitting in Shoreham-by-Sea
- Utility room fitting in Portslade
- Utility room fitting across West Sussex