Replacement kitchen doors in Gateshead

When do replacement kitchen doors make sense in Gateshead?

When one door in a Gateshead kitchen is broken and the range is no longer made, a full set of new matching doors is often the neatest answer.

If you have bought a Gateshead home where the kitchen layout works but the colour does not, new doors and handles can change the look in a day or two. We cover all of Gateshead, including the NE8 postcode district, and travel out to neighbouring towns across Tyne and Wear.

What we cover for replacement kitchen doors in Gateshead

After the survey visit we write the scope down. For replacement kitchen doors in Gateshead it usually covers:

Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Doors and drawer fronts made to measure or matched to the existing sizes
Handles or knobs drilled from a template so they sit at a consistent height
New soft-close hinges fitted and every door adjusted so the gaps run even
Matching end panels, plinths, cornice and pelmet cut and fitted
Hinge holes drilled to line up with the positions on your carcasses

Replacement kitchen doors prices in Gateshead

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Labour rates in the North East are generally lower than in London and the South East, so these ranges are a little below the national guide.

Replacement kitchen doors prices in Gateshead
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£900–£2,700
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,800–£4,500
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£270–£720
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£540

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

House types around Gateshead and what they mean for a kitchen

In and around Gateshead, homes range across tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling. Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter.

What rules apply to replacement kitchen doors in Gateshead?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Before you book replacement kitchen doors in Gateshead

Choose handles after the doors, holding samples against the new colour in your Gateshead kitchen's daylight before anything is drilled.
Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
If you let out a Gateshead property, new doors can often be fitted between tenancies in a day or two once they have been delivered.
Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.

Questions about replacement kitchen doors in Gateshead

How much do replacement kitchen doors cost in Gateshead?

Guide prices in Gateshead are about £900 to £2,700 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you cover all of Gateshead?

Yes. We work across Gateshead, including the NE8 postcode district, and nearby towns such as Newcastle upon Tyne and Felling. Book a free survey visit and we will arrange a time that suits you.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

Can I change to a completely different door style?

Usually, yes. Slab, shaker and painted doors can all go on standard carcasses if the sizes and hinge positions suit. An in-frame look is more involved, because the doors sit inside a frame built onto the front of the units, so it costs more. A true handleless kitchen uses rails built into the carcasses, so with a door change that look is imitated with edge-profiled doors instead.

Replacement kitchen doors near Gateshead

The same service is available a short drive from Gateshead, including: