Replacement kitchen doors in Felling

Why do people in Felling choose replacement kitchen doors?

Some Felling households getting ready to sell want the kitchen to look fresher in the photographs without the cost and mess of taking it out.

Peeling wrapped doors near the oven or kettle are a common reason people in Felling ask about replacements, especially when the units underneath are still fine. If your home is in Felling or close by in Gateshead or Newcastle upon Tyne, the same survey, quote and fitting process applies.

What we cover for replacement kitchen doors in Felling

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Drawer fronts fixed to existing drawer boxes, or new boxes where worn
Matching end panels, plinths, cornice and pelmet cut and fitted
New soft-close hinges fitted and every door adjusted so the gaps run even
Doors and drawer fronts made to measure or matched to the existing sizes
Hinge holes drilled to line up with the positions on your carcasses
Handles or knobs drilled from a template so they sit at a consistent height

What should you budget for replacement kitchen doors in Felling?

These guide ranges include VAT at 20% and are adjusted for prices in the North East. We confirm your price in writing after a free survey visit. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.

What should you budget for replacement kitchen doors in Felling?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£900–£2,700
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,800–£4,500
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£270–£720
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£540

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Felling?

You will find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses throughout Tyne and Wear. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

Do you need approval for replacement kitchen doors in Felling?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Planning ahead

Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
Count every door, drawer front, end panel and plinth before asking for prices, including integrated appliance doors and panels at the ends of runs.
If you let out a Felling property, new doors can often be fitted between tenancies in a day or two once they have been delivered.
Check the carcasses first; a swollen sink base, a sagging shelf or loose hinge plates mean some units may need replacing before new doors.

Questions about replacement kitchen doors in Felling

How much do replacement kitchen doors cost in Felling?

Guide prices in Felling are about £900 to £2,700 including VAT for 15 to 20 doors and drawer fronts, supplied and fitted. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Do you work near Felling as well?

Yes. As well as Felling itself, we cover the rest of Tyne and Wear and nearby towns such as Gateshead and Newcastle upon Tyne. The process is the same wherever the kitchen is.

When does a new kitchen make more sense than new doors?

When the problem is more than the look. If several carcasses are swollen or broken, the layout does not work for you, or you want to move the sink, hob or appliances, new doors only cover the issue. New doors suit kitchens whose cabinets are square, dry and well fixed and whose layout still works. We will tell you at the survey which route we think makes sense.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Replacement kitchen doors near Felling

The same service is available a short drive from Felling, including: