Replacement kitchen doors in Newcastle upon Tyne

Who usually needs replacement kitchen doors in Newcastle upon Tyne?

Peeling wrapped doors near the oven or kettle are a common reason people in Newcastle upon Tyne ask about replacements, especially when the units underneath are still fine.

If your Tyne and Wear kitchen has worktops you still like but dated doors, new fronts in a different style or colour let you keep the surfaces and change the rest. We work throughout Newcastle upon Tyne (NE1) and across the wider Tyne and Wear area.

What does the job involve?

Your written quote lists everything included. For replacement kitchen doors, that normally means:

Matching end panels, plinths, cornice and pelmet cut and fitted
Doors and drawer fronts made to measure or matched to the existing sizes
Handles or knobs drilled from a template so they sit at a consistent height
Hinge holes drilled to line up with the positions on your carcasses
Drawer fronts fixed to existing drawer boxes, or new boxes where worn
New fronts fixed to integrated appliances with their door-fixing kits

What should you budget for replacement kitchen doors in Newcastle upon Tyne?

As a starting point for Newcastle upon Tyne, these ranges include VAT at 20% and allow for typical labour costs in the North East. Costs across the North East tend to sit under UK averages, which these ranges reflect.

What should you budget for replacement kitchen doors in Newcastle upon Tyne?
Typical project	Guide price
Doors and drawer fronts supplied and fitted (15–20 doors)Standard ranges, with new hinges and handles	£900–£2,700
Bespoke, in-frame or hand-painted doorsMade to measure for your carcasses	£1,800–£4,500
Fitting only, doors you have boughtHanging, adjusting, handles drilled and fitted	£270–£720
Matching end panels, plinths and corniceCut and fitted to suit the new doors	£140–£540

Guide ranges cover doors, drawer fronts, hinges and handles for a typical kitchen of 15 to 20 doors; replacing swollen carcasses, worktops or appliances is priced separately. Prices include VAT at 20%.

What kind of kitchens do we fit in Newcastle upon Tyne?

Across Tyne and Wear you will often find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, and each shapes the kitchen differently. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

What rules apply to replacement kitchen doors in Newcastle upon Tyne?

Replacing kitchen doors needs no planning permission or Building Regulations approval in England, because nothing structural, electrical or plumbed changes. The exception is a listed building, where original fitted cupboards or joinery may need listed building consent before they are altered. If you add plinth or cornice lighting at the same time, the wiring must meet BS 7671, and a new circuit for it would be notifiable under Part P.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Before you book replacement kitchen doors in Newcastle upon Tyne

Ask whether the cornice and pelmet will be replaced too, as old ones left on a Newcastle upon Tyne kitchen with new doors often show a colour mismatch.
Choose handles after the doors, holding samples against the new colour in your Newcastle upon Tyne kitchen's daylight before anything is drilled.
Allow for delivery time on made-to-measure doors; your kitchen stays usable while you wait, as nothing comes off until they arrive.
If the worktops are also worn, consider replacing them in the same visit rather than fitting new doors beside tired surfaces.

Questions about replacement kitchen doors in Newcastle upon Tyne

How much do replacement kitchen doors cost in Newcastle upon Tyne?

For 15 to 20 doors and drawer fronts, supplied and fitted, budget around £900 to £2,700 including VAT in Newcastle upon Tyne. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Do you work near Newcastle upon Tyne as well?

Yes. As well as Newcastle upon Tyne itself, we cover the rest of Tyne and Wear and nearby towns such as Gateshead and Gosforth. The process is the same wherever the kitchen is.

Can new doors be fitted to my existing kitchen units?

Usually, yes, as long as the carcasses are sound. We measure every door and drawer front at the survey and check the hinge positions, because sizes vary between makers and older kitchens often use sizes that are no longer standard. Doors are then made to measure or matched to your units, drilled for new hinges and hung so the gaps line up across each run.

Are new hinges and handles fitted with the doors?

Yes, normally. Old hinges are often worn or set for the old doors, so new soft-close hinges are fitted and adjusted so the doors close quietly and the gaps run even. Handles are drilled from a template so every one sits at the same height and distance from the edge. If you would like to reuse your existing handles, the new doors are drilled to suit them.

What if some of my kitchen units are water damaged?

Damaged units are replaced before the new doors go on, because swollen chipboard does not recover. The sink base is the usual problem, from slow leaks at the trap or tap, followed by units beside the dishwasher. We check every carcass at the survey, look for the cause of any leak, and price replacement units as a separate line so you can see the cost clearly.

Replacement kitchen doors in neighbouring towns

We also carry out replacement kitchen doors in these towns near Newcastle upon Tyne: