Kitchen worktop fitting · Tyne and Wear
Kitchen worktop fitting in Gateshead
From the survey to handover, kitchen worktop fitting in Gateshead is run by us as one job, with the fitters and trades booked in the right order.
Why do people in Gateshead choose kitchen worktop fitting?
Solid wood that has blackened around the sink and tap is a common reason people in Gateshead ask about replacing their worktops with something new.
Households in Gateshead who cook a lot often want a harder-wearing surface near the hob, such as quartz, sintered stone or compact laminate, that copes with daily use. Our Tyne and Wear coverage reaches every part of Gateshead (NE8) and out towards Newcastle upon Tyne.
What is included in the work?
The exact scope is agreed after the survey, but a typical job in Gateshead covers:
- Quartz, granite or sintered stone templated once the base units are fixed and level
- Sink, tap and hob reconnected, with gas hobs connected by Gas Safe registered engineers
- Old worktops removed and taken away, with the sink and hob disconnected safely
- Solid wood oiled before and after fitting and fixed to allow seasonal movement
- Undermount sink and hob cut-outs cut and finished by the stone fabricator
- Laminate jointed with a mason's mitre or joint strips, and every cut edge sealed
How much does kitchen worktop fitting cost in Gateshead?
The figures below are guide prices for Gateshead, including VAT and adjusted for typical costs across the North East. The fixed price comes after we have measured up. Prices in the North East usually come in below the national guide, as labour rates are lower than in the South East.
| Typical project | Guide price |
|---|---|
| Laminate worktops, supplied and fittedTypical kitchen, joints, cut-outs and upstands | £450–£1,100 |
| Solid wood worktops, supplied and fittedOiled before and after fitting | £810–£1,600 |
| Granite, templated and fittedTemplate visit, cutting, delivery and fitting | £1,400–£2,900 |
| Quartz, templated and fittedTemplate visit, cutting, delivery and fitting | £1,600–£3,200 |
| Old worktops removed and taken awayMore for stone | £70–£220 |
Guide ranges are for a typical kitchen and include the worktops, cut-outs, upstands and fitting; removing old tops is a separate line, and new sinks, taps and splashbacks are priced on top. Prices include VAT at 20%.
Kitchens in homes around Gateshead
You will find tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses throughout Tyne and Wear. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.
Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.
Regulations for kitchen work in Gateshead
New worktops need no planning permission or Building Regulations approval in England. Disconnecting and reconnecting a gas hob must be done by a Gas Safe registered engineer, and an electric hob or oven goes back on its existing circuit. Moving or adding sockets above the worktop on an existing kitchen circuit is not notifiable, but it must meet BS 7671. In a listed building, check before removing any original fitted joinery.
In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.
Planning ahead
- Plan the joint positions before ordering laminate, keeping them away from the sink and dishwasher, where water is most likely to sit.
- Before templating day at your Gateshead home, make sure the sink, tap and hob are on site so the stone can be cut to them.
- If your Tyne and Wear home has uneven walls, ask how the worktop will be scribed so the back edge meets the wall without wide gaps.
- Solid wood needs regular re-oiling and should not be left with standing water around the sink, tap or kettle.
Questions about kitchen worktop fitting in Gateshead
How much does kitchen worktop fitting cost in Gateshead?
Kitchen worktop fitting in Gateshead typically costs £450 to £1,100 including VAT for laminate worktops, supplied and fitted, based on prices in the North East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Which parts of Gateshead do you work in?
All of them. Our Tyne and Wear coverage takes in the whole of Gateshead, including the NE8 postcode district, as well as surrounding towns such as Newcastle upon Tyne. If you are unsure, send us your postcode.
How do I look after a solid wood worktop?
Oil it regularly and keep it away from standing water. Wood is oiled on every face before fitting and given further coats once in place, then re-oiled more often in the first months. Wipe up round the sink and tap, and do not leave wet cloths or a dripping kettle on it. It is fixed with slotted brackets so it can expand and shrink with the seasons without cracking.
Will you fit stone worktops I have ordered myself?
Yes, alongside your stone supplier. Stone must be templated and fabricated by the supplier once the base units are fixed and level, so our part is getting the units ready, checking they are sound and reconnecting the sink, tap and hob after the stone is in. Laminate and wood worktops you have bought can be cut, jointed and fitted on site in the usual way.
How are laminate worktops joined at corners?
With either a mason's mitre or a joint strip. A mason's mitre is routed with a jig so the front edge profile turns the corner, then glued, sealed and pulled tight with connector bolts underneath. A joint strip is a metal or colour-matched profile fixed and sealed between the two lengths. Either way, every cut edge, including the sink and hob cut-outs, is sealed so water cannot swell the core.
Kitchen worktop fitting in neighbouring towns
Neighbouring towns where we offer kitchen worktop fitting:
- Kitchen worktop fitting in Newcastle upon Tyne
- Kitchen worktop fitting in Felling
- Kitchen worktop fitting in Gosforth
- Kitchen worktop fitting in Wallsend
- Kitchen worktop fitting in Hebburn
- Kitchen worktop fitting in Jarrow
- Kitchen worktop fitting across Tyne and Wear