Kitchen refurbishment in Gateshead

Thinking about kitchen refurbishment in Gateshead?

If the kitchen in your Gateshead flat is compact and well planned, there is little to gain from moving anything; new surfaces, a new sink and better lighting can do most of the work.

Landlords across Tyne and Wear often refurbish rather than replace between tenancies, because new doors, worktops and a sink can be fitted in days and the units underneath are rarely the problem. Kitchens in every part of Gateshead are covered, and the survey visit is free wherever you are in Tyne and Wear.

What is included in the work?

Every kitchen is different, so we confirm the scope in writing. Most jobs of this kind include:

Old worktops removed and new laminate, wood or stone worktops fitted
Tiled, glass or panel splashback fitted once the new worktops are in
Free survey visit to check every carcass for water damage, level and fixings
New handles drilled and fitted, with hinges and drawer runners adjusted or replaced
Under-cabinet and ceiling lighting updated by an electrician and tested to BS 7671
Sink and tap replaced on the existing supplies and waste

What should you budget for kitchen refurbishment in Gateshead?

As a starting point for Gateshead, these ranges include VAT at 20% and allow for typical labour costs in the North East. Costs across the North East tend to sit under UK averages, which these ranges reflect.

What should you budget for kitchen refurbishment in Gateshead?
Typical project	Guide price
New doors, worktops and handles on sound unitsCarcasses kept, everything you see replaced	£2,200–£5,400
Refresh plus sink, tap, splashback and lightingA full visual refit without moving services	£3,600–£8,100
Partial refit with some new units and appliancesDamaged units swapped, new appliances fitted	£5,400–£12,600

Guide ranges assume the existing layout and services stay in place with laminate or wood worktops; stone worktops, moved services, new circuits, flooring and plastering are priced as separate lines. Prices include VAT at 20%.

What kind of kitchens do we fit in Gateshead?

The housing mix across Tyne and Wear includes tyneside flats, Victorian terraces, 1930s semis and post-war council-built houses, so no two kitchen fits are quite alike. Tyneside flats often have a narrow kitchen in the rear offshoot, while 1930s semis and ex-council houses tend to have a small square kitchen at the back.

Hardness varies across Tyne and Wear, from fairly soft around Newcastle to harder in parts of Sunderland, so check with your supplier before choosing a filter. Back lanes behind terraced streets can help deliveries, but upper Tyneside flats have their own internal stair, so long worktops need careful handling.

What rules apply to kitchen refurbishment in Gateshead?

Refurbishing a kitchen in England needs no planning permission or Building Regulations approval in itself, though a listed home may need listed building consent before historic features are removed. Swapping light fittings or adding sockets on existing kitchen circuits is not notifiable under Part P but must meet BS 7671; a new circuit is notifiable. A gas hob must be disconnected and reconnected by a Gas Safe registered engineer.

In conservation areas and listed buildings, such as parts of central Newcastle and Tynemouth, a new external vent or changes to historic features may need consent.

Getting the most from your kitchen refurbishment

Photograph the inside of a few cupboards, including the hinges and drawer boxes, so replacement doors and fronts can be matched to your existing carcasses.
If you let a property in Gateshead, book the refurbishment between tenancies and choose durable finishes such as laminate worktops and wipe-clean splashbacks.
Choose handles after the doors and confirm the hole spacing, because drilling new doors for the wrong size of bar handle cannot be undone neatly.
Keep appliances that fit their housings, but check that any new integrated appliance matches the existing gap and door-fixing method.

Questions about kitchen refurbishment in Gateshead

How much does kitchen refurbishment cost in Gateshead?

For new doors, worktops and handles on sound units, budget around £2,200 to £5,400 including VAT in Gateshead. That reflects typical costs in the North East; we confirm the actual figure in writing once we have measured up.

Which parts of Gateshead do you work in?

All of them. Our Tyne and Wear coverage takes in the whole of Gateshead, including the NE8 postcode district, as well as surrounding towns such as Newcastle upon Tyne. If you are unsure, send us your postcode.

How long will I be without a kitchen during a refurbishment?

Usually two to seven days on site. New doors and handles can often be fitted in a day or two with the kitchen usable between visits. Replacing worktops, the sink and the splashback takes longer, and stone worktops add about one to two weeks between templating and fitting. Ask about a temporary worktop so the sink can stay in use during that gap.

Can I keep my existing appliances during a refurbishment?

Usually, yes. Built-in ovens, hobs and integrated appliances can stay if they work well and suit the existing housings. If you replace one, the new appliance must match the housing dimensions and door-fixing method, and a larger oven or an induction hob may need a new cooker circuit. We check model numbers and sizes at the survey, before you buy anything.

How do you check whether my kitchen units are sound?

At the survey we check the carcasses one by one. We look for swollen or flaking board around the sink, dishwasher and kettle area, staining from old leaks, sagging shelves, damaged hinge holes, loose wall fixings and units that have dropped out of level. Sound carcasses are kept, and damaged ones are listed on the quote as replacements so nothing is left to chance later.

Kitchen refurbishment in neighbouring towns

The same service is available a short drive from Gateshead, including: