Kitchen Installers UK

Splashbacks and tiling · England

Splashbacks and tiling in Warwickshire

If you need splashbacks and tiling anywhere in Warwickshire, we survey the kitchen, agree the scope with you and book every trade through to handover.

Guide price£150 to £800
Towns covered8 towns, including Nuneaton
Timescale1 to 2 days
A tiler setting white metro tiles as a splashback between a new worktop and the wall units above

Who usually needs splashbacks and tiling in Warwickshire?

Homeowners in Warwickshire often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish.

Many people in Warwickshire choose a single panel of toughened glass behind the hob because it wipes clean quickly and has no grout lines to hold grease.

What do splashbacks and tiling in Warwickshire include?

Your written quote lists everything included. For splashbacks and tiling, that normally means:

  • Free survey visit to check the walls, agree the layout and give an itemised quote
  • Old tiles removed and walls prepared, patched or boarded where needed
  • Tiled splashbacks between the worktop and wall units, set out from a centre line
  • Full-height or feature tiling behind the hob, sink or open shelving
  • Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
  • Stone upstands and splashbacks templated and fitted alongside a stone worktop
  • Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
  • Socket and switch plates refitted by an electrician once the tiling is finished

How much do splashbacks and tiling cost in Warwickshire?

These guide ranges include VAT at 20% and are adjusted for prices in the West Midlands. We confirm your price in writing after a free survey visit. Costs in the West Midlands sit close to the national guide.

How much do splashbacks and tiling cost in Warwickshire?
Typical projectGuide price
Tiled splashbackBetween worktop and wall units£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in£250–£600
Stone upstands and splashbacksTemplated with the worktopPriced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Kitchens in homes across Warwickshire

You will find Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis throughout Warwickshire. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.

Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help. Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance.

A Regency flat in Leamington may have its kitchen in a former reception room with high ceilings and original features. Terraces and semis elsewhere in the county more often need a straight replacement or a knock-through to the dining room.

Rules for splashbacks and tiling in Warwickshire

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.

Before you start

  • Pale grout behind a hob or sink shows stains quickly; a mid-grey or stain-resistant grout in narrow joints is easier to keep looking fresh.
  • Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.
  • Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.
  • Heavy tiles, such as large porcelain or natural stone, may need a stronger backing board and a suitable adhesive, so have the wall checked first.
  • If you are renting out a flat in Warwickshire, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
  • Hold a few of your chosen tiles against the wall in your Warwickshire kitchen, in daylight and under the kitchen lights, before ordering the full quantity.

Questions about splashbacks and tiling in Warwickshire

How much do splashbacks and tiling cost in Warwickshire?

Splashbacks and tiling in Warwickshire typically cost £150 to £400 including VAT for a tiled splashback, based on prices in the West Midlands. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Warwickshire?

Yes. We carry out splashbacks and tiling across Warwickshire, including Nuneaton, Rugby, Leamington Spa and Warwick. Every job starts with a free survey visit and an itemised written quote.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Can you tile over existing kitchen tiles?

Sometimes, but it is rarely the better choice in a kitchen. Tiling over old tiles adds thickness, so sockets, switches and the edge against the wall units may no longer line up, and the new tiles rely on the old ones staying firmly bonded. If the existing tiles are sound and flat it can work for a small area; otherwise we remove them and prepare the wall.

Splashbacks and tiling in towns across Warwickshire

Choose a town for local guide prices and postcode coverage:

Splashbacks and tiling in nearby areas

Free survey visit

Book a free survey visit in Warwickshire

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price