Splashbacks and tiling in Alcester

Why do people in Alcester choose splashbacks and tiling?

If the units in your Alcester kitchen are already fitted and only the walls are unfinished, we can take on the tiling or splashback as a job on its own.

If the kitchen in your Alcester home is sound but the tiles are dated, cracked or stained, a new splashback is one of the simplest ways to refresh it without replacing units. We cover all of Alcester, including the B49 postcode district, and travel out to neighbouring towns across Warwickshire.

What does the job involve?

Here is what usually goes into splashbacks and tiling, adjusted to your Alcester kitchen after we have measured it:

Free survey visit to check the walls, agree the layout and give an itemised quote
Tiled splashbacks between the worktop and wall units, set out from a centre line
Full-height or feature tiling behind the hob, sink or open shelving
Grout and sealant chosen for easy cleaning, with flexible sealant at the worktop joint
Socket and switch plates refitted by an electrician once the tiling is finished
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs

Guide prices for splashbacks and tiling in Alcester

As a starting point for Alcester, these ranges include VAT at 20% and allow for typical labour costs in the West Midlands. For the West Midlands, these ranges are close to the national figures.

Guide prices for splashbacks and tiling in Alcester
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Local homes and their kitchens

The housing mix across Warwickshire includes Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis, so no two kitchen fits are quite alike. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.

Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance. Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help.

Building regulations, electrics and gas in Alcester

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.

Getting the most from your splashbacks and tiling

If you are renting out a flat in Alcester, a single glass panel or large plain tiles cut down the grout that needs cleaning at each check-out.
Choosing stone worktops for an Alcester kitchen? Ask for upstand and splashback heights to be confirmed before the template visit, not after.
Hold a few of your chosen tiles against the wall in your Alcester kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Agree socket, switch and cooker hood positions before tiling starts; moving them afterwards means cutting tiles out and patching in replacements that may not match.

Questions about splashbacks and tiling in Alcester

How much do splashbacks and tiling cost in Alcester?

For a tiled splashback, budget around £150 to £400 including VAT in Alcester. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Can you measure up in Alcester before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Alcester. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling near Alcester

We also carry out splashbacks and tiling in these towns near Alcester: