Splashbacks and tiling in Bedworth

When do splashbacks and tiling make sense in Bedworth?

If your Bedworth home is an older property with uneven walls, the splashback may start with patching, skimming or boarding so the tiler has a flat surface to work from.

Homeowners in Bedworth often add a splashback as the final stage of a new kitchen, once the worktops are in and the bare wall above them needs a washable finish. Bedworth sits about 3 miles south of Nuneaton, and our Warwickshire coverage takes in everything in between.

What does the job involve?

Here is what usually goes into splashbacks and tiling, adjusted to your Bedworth kitchen after we have measured it:

Old tiles removed and walls prepared, patched or boarded where needed
Toughened glass splashback measured after the worktops are fitted, with socket cut-outs
Stone upstands and splashbacks templated and fitted alongside a stone worktop
Socket and switch plates refitted by an electrician once the tiling is finished
Full-height or feature tiling behind the hob, sink or open shelving
Free survey visit to check the walls, agree the layout and give an itemised quote

What should you budget for splashbacks and tiling in Bedworth?

The figures below are guide prices for Bedworth, including VAT and adjusted for typical costs across the West Midlands. The fixed price comes after we have measured up. Prices across the West Midlands are broadly in line with UK averages.

What should you budget for splashbacks and tiling in Bedworth?
Typical project	Guide price
Tiled splashbackBetween worktop and wall units	£150–£400
Kitchen wall tiling, 4–6 m²Preparation, tiling and grouting	£300–£800
Toughened glass splashback behind the hob, fittedMade to measure after the worktops are in	£250–£600
Stone upstands and splashbacksTemplated with the worktop	Priced with the worktop

Tiling guide ranges cover preparation, adhesive, grout, trims and fixing, with the tiles themselves confirmed once chosen; the glass range includes a made-to-measure panel, and stone upstands are priced with the worktop. Prices include VAT at 20%.

Fitting kitchens in older and newer Bedworth homes

You will find Regency townhouses, timber-framed cottages, Victorian terraces and 1930s semis throughout Warwickshire. Victorian terraces in Nuneaton and Rugby often have a narrow back kitchen, while Regency townhouses in Leamington tend to have kitchens in former service rooms or flats.

Water across Warwickshire is mostly hard, so limescale on taps and boiling water taps is common, and a filter or softener can help. Regency townhouses converted to flats may have no lift, and historic town centres can have restricted parking, so delivery needs arranging in advance.

What rules apply to splashbacks and tiling in Bedworth?

Tiling or fitting a splashback in England needs no planning permission or building regulations approval. If sockets or switches are moved to suit the new wall finish, that is electrical work to BS 7671; adding to an existing kitchen circuit is not notifiable under Part P, but a new circuit is. Behind a gas hob, follow the hob maker's clearance instructions, and in a listed building, removing historic tiles or panelling may need listed building consent.

Stratford-upon-Avon, Warwick and Leamington Spa have many listed buildings and conservation areas, so new vents or internal changes may need listed building consent or planning permission.

Worth knowing before the fit

Ask to see where the tiling will start before the first row goes on in your Bedworth kitchen, so narrow cut tiles end up in corners rather than on show.
Hold a few of your chosen tiles against the wall in your Bedworth kitchen, in daylight and under the kitchen lights, before ordering the full quantity.
Clear the worktop and empty the nearest wall cupboards before the tiler arrives at your Bedworth home, as cutting dust and adhesive travel further than you expect.
Choosing stone worktops? Decide on upstands or a full-height splashback before templating, so they can be cut from the same material and priced together.

Questions about splashbacks and tiling in Bedworth

How much do splashbacks and tiling cost in Bedworth?

For a tiled splashback, budget around £150 to £400 including VAT in Bedworth. That reflects typical costs in the West Midlands; we confirm the actual figure in writing once we have measured up.

Do you cover all of Bedworth?

Yes. We work across Bedworth, including the CV12 postcode district, and nearby towns such as Nuneaton and Coventry. Book a free survey visit and we will arrange a time that suits you.

Can a glass splashback go behind a gas hob?

Yes, usually, as long as the glass is toughened and the hob maker's instructions allow it. Toughened glass handles heat far better than ordinary glass, but a gas hob must still keep the clearances set out in its installation instructions, so we check those before ordering. The panel is measured after the worktops are fitted and made with cut-outs for sockets, because it cannot be cut once toughened.

Can heavy tiles or stone go on any kitchen wall?

Not always. Heavy tiles such as large-format porcelain or natural stone need a backing that can carry their weight and an adhesive suited to both the tile and the wall. Old plaster, painted plaster or plasterboard may need preparing, priming or replacing with a tile backer board first. We check the wall at the survey and follow the tile and adhesive makers' guidance.

When are splashbacks fitted during a kitchen installation?

Splashbacks go on near the end, once the worktops are fixed and the electrician has agreed where the sockets and switches will sit. Tiles need a finished worktop to start from, glass is measured off the fitted worktop, and stone upstands are templated at the same visit as the worktop. Faceplates go back on after tiling, so the sockets sit neatly against the new finish.

Splashbacks and tiling in neighbouring towns

The same service is available a short drive from Bedworth, including: