Hob and oven installation · England
Hob and oven installation in Wiltshire
Homeowners and landlords across Wiltshire can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.
Why hob and oven installation for a Wiltshire home?
Families in Wiltshire adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.
Some people in Wiltshire buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.
What does hob and oven installation in Wiltshire include?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Wiltshire?
As a starting point for Wiltshire, these ranges include VAT at 20% and allow for typical labour costs in the South West. Costs in the South West sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across Wiltshire
Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.
Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.
Railway terraces often have a narrow galley that owners open into the dining room to make a family kitchen. In a thatched or stone cottage, uneven walls and floors usually mean careful scribing, and cooker extraction needs extra thought where a vent cannot easily go through a thick or listed wall.
Rules for hob and oven installation in Wiltshire
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.
Before you start
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
- Check the induction hob's power rating against your existing cooker circuit, as induction hobs often need a dedicated circuit from the consumer unit.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- Before buying an induction hob for your Wiltshire home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Wiltshire.
Questions about hob and oven installation in Wiltshire
How much does hob and oven installation cost in Wiltshire?
For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Wiltshire. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of Wiltshire?
Yes. We carry out hob and oven installation across Wiltshire, including Swindon, Salisbury, Trowbridge and Chippenham. Every job starts with a free survey visit and an itemised written quote.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Hob and oven installation in towns across Wiltshire
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Swindon
- Hob and oven installation in Salisbury
- Hob and oven installation in Trowbridge
- Hob and oven installation in Chippenham
- Hob and oven installation in Melksham
- Hob and oven installation in Warminster
- Hob and oven installation in Devizes
- Hob and oven installation in Marlborough
- Hob and oven installation in Malmesbury