Hob and oven installation in Salisbury

Thinking about hob and oven installation in Salisbury?

Families in Salisbury adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day.

If your Salisbury kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. Kitchens in every part of Salisbury are covered, and the survey visit is free wherever you are in Wiltshire.

What is in a typical job?

Here is what usually goes into hob and oven installation, adjusted to your Salisbury kitchen after we have measured it:

Built-in single and double ovens fixed into housings with their ventilation gaps
Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
Gas supply moved to a new hob position, with pipework tested and made good
Old hob or oven disconnected safely and taken away for recycling
Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer

Guide prices for hob and oven installation in Salisbury

As a starting point for Salisbury, these ranges include VAT at 20% and allow for typical labour costs in the South West. Prices across the South West are broadly in line with UK averages.

Guide prices for hob and oven installation in Salisbury
Typical project	Guide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested	£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test	£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted	£150–£410
New gas pipe run to a new hob positionPipework, testing and making good	£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes around Salisbury

In and around Salisbury, homes range across thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.

Building regulations, electrics and gas in Salisbury

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Before you book hob and oven installation in Salisbury

If your Salisbury home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
If you are replacing an old cooker with a separate hob and oven in your Salisbury kitchen, ask for the gas supply position and condition to be checked first.
Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.

Questions about hob and oven installation in Salisbury

How much does hob and oven installation cost in Salisbury?

For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Salisbury. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.

Do you cover all of Salisbury?

Yes. We work across Salisbury, including the SP1 postcode district, and nearby towns such as Romsey and Ringwood. Book a free survey visit and we will arrange a time that suits you.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Hob and oven installation in neighbouring towns

We also carry out hob and oven installation in these towns near Salisbury: