Hob and oven installation · Wiltshire
Hob and oven installation in Chippenham
Homeowners and landlords in Chippenham can book us for hob and oven installation: gas, induction and ceramic hobs, built-in ovens and range cookers fitted and connected safely.

When does hob and oven installation make sense in Chippenham?
Many households in Chippenham switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.
If your Chippenham kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking. If your home is in Chippenham or close by in Melksham or Malmesbury, the same survey, quote and fitting process applies.
What we cover for hob and oven installation in Chippenham
Your written quote lists everything included. For hob and oven installation, that normally means:
- Gas supply moved to a new hob position, with pipework tested and made good
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Old hob or oven disconnected safely and taken away for recycling
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
Guide prices for hob and oven installation in Chippenham
Typical hob and oven installation prices for homes in Chippenham, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. For the South West, these ranges are close to the national figures.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
House types around Chippenham and what they mean for a kitchen
Across Wiltshire you will often find thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates, and each shapes the kitchen differently. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.
Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance. Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help.
Building regulations, electrics and gas in Chippenham
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.
Getting the most from your hob and oven installation
- If you are moving the hob in your Chippenham kitchen, choose the cooker hood at the same time so the extraction and ducting can follow it.
- Measure the gap for a range cooker at worktop height and at floor level, as older walls and thick skirting can narrow the space more than expected.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
Questions about hob and oven installation in Chippenham
How much does hob and oven installation cost in Chippenham?
For connecting a gas hob to an existing supply, budget around £120 to £310 including VAT in Chippenham. That reflects typical costs in the South West; we confirm the actual figure in writing once we have measured up.
Do you cover all of Chippenham?
Yes. We work across Chippenham, including the SN15 postcode district, and nearby towns such as Melksham and Malmesbury. Book a free survey visit and we will arrange a time that suits you.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Also covering nearby towns
We also carry out hob and oven installation in these towns near Chippenham:
- Hob and oven installation in Melksham
- Hob and oven installation in Malmesbury
- Hob and oven installation in Devizes
- Hob and oven installation in Trowbridge
- Hob and oven installation in Bath
- Hob and oven installation in Yate
- Hob and oven installation across Wiltshire
