Hob and oven installation · Wiltshire
Hob and oven installation in Malmesbury
We take on hob and oven installation in Malmesbury and the surrounding SN16 postcodes, working to a written scope so you know exactly what is included before anyone starts.
Is hob and oven installation right for your Malmesbury kitchen?
A new kitchen layout in Malmesbury sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
Many households in Malmesbury switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely. Kitchens in every part of Malmesbury are covered, and the survey visit is free wherever you are in Wiltshire.
What is in a typical job?
Here is what usually goes into hob and oven installation, adjusted to your Malmesbury kitchen after we have measured it:
- Gas supply moved to a new hob position, with pipework tested and made good
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Old hob or oven disconnected safely and taken away for recycling
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Built-in single and double ovens fixed into housings with their ventilation gaps
How much does hob and oven installation cost in Malmesbury?
Typical hob and oven installation prices for homes in Malmesbury, including VAT and adjusted for the South West. Your own figure depends on the size of the kitchen, the layout and what is moving. Costs in the South West sit close to the national guide.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Fitting kitchens in older and newer Malmesbury homes
In and around Malmesbury, homes range across thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.
Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.
Building regulations, electrics and gas in Malmesbury
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.
Before you book hob and oven installation in Malmesbury
- Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Wiltshire.
- If your Malmesbury home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
Questions about hob and oven installation in Malmesbury
How much does hob and oven installation cost in Malmesbury?
Hob and oven installation in Malmesbury typically costs £120 to £310 including VAT for connecting a gas hob to an existing supply, based on prices in the South West. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.
Do you cover all of Malmesbury?
Yes. We work across Malmesbury, including the SN16 postcode district, and nearby towns such as Chippenham and Cirencester. Book a free survey visit and we will arrange a time that suits you.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Nearby places we cover
The same service is available a short drive from Malmesbury, including:
- Hob and oven installation in Chippenham
- Hob and oven installation in Cirencester
- Hob and oven installation in Stroud
- Hob and oven installation in Swindon
- Hob and oven installation in Yate
- Hob and oven installation in Melksham
- Hob and oven installation across Wiltshire