Hob and oven installation · England
Hob and oven installation in Dorset
We carry out hob and oven installation across Dorset, from Bournemouth to the smaller towns, with a free survey visit and an itemised written quote as standard.
Why do people in Dorset choose hob and oven installation?
A new kitchen layout in Dorset sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.
If your Dorset kitchen has an old ceramic hob with a cracked top, an induction replacement may fit the same cut-out, though the circuit still needs checking.
What does hob and oven installation in Dorset include?
Your written quote lists everything included. For hob and oven installation, that normally means:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in Dorset?
These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Prices across the South West are broadly in line with UK averages.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £120–£310 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £120–£260 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £150–£410 |
| New gas pipe run to a new hob positionPipework, testing and making good | £260–£820 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across Dorset
The housing mix across Dorset includes thatched cottages, Victorian and Edwardian villas, 1930s semis and seaside bungalows, so no two kitchen fits are quite alike. Edwardian villas in Bournemouth often have a separate kitchen and scullery, while 1930s semis and bungalows tend to have a compact room at the back.
Most of Dorset has hard water, so limescale on taps, sinks and boiling water taps is common, and a scale-reducing filter can help. Flats in converted villas may have no lift and shared hallways, and narrow village lanes can make delivering long worktops difficult.
Converted villa flats often mean fitting a full kitchen into a small room while keeping neighbours and shared services in mind. Many bungalow owners choose to open the kitchen into the dining room, so the layout and new lighting need planning together.
Rules for hob and oven installation in Dorset
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Thatched and listed cottages may need listed building consent for internal changes, and owners of flats in converted houses usually need the freeholder's consent before work starts.
Before you start
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
- Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
- If your Dorset home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
- Before buying an induction hob for your Dorset home, check the rating of the cooker circuit at the consumer unit, or ask for it to be checked at the survey.
Questions about hob and oven installation in Dorset
How much does hob and oven installation cost in Dorset?
Guide prices in Dorset are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.
Do you cover the whole of Dorset?
Yes. We carry out hob and oven installation across Dorset, including Bournemouth, Poole, Weymouth and Christchurch. Every job starts with a free survey visit and an itemised written quote.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Do built-in ovens need ventilation?
Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Hob and oven installation in towns across Dorset
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Bournemouth
- Hob and oven installation in Poole
- Hob and oven installation in Weymouth
- Hob and oven installation in Christchurch
- Hob and oven installation in Dorchester
- Hob and oven installation in Bridport
- Hob and oven installation in Blandford Forum
- Hob and oven installation in Swanage
- Hob and oven installation in Sherborne
- Hob and oven installation in Shaftesbury