Kitchen Installers UK

Hob and oven installation · Wiltshire

Hob and oven installation in Trowbridge

Hob and oven installation in Trowbridge starts with a free survey visit: we measure up, check the walls, floor and service positions, and explain what the job involves before anything is priced.

Guide price£120 to £820
Postcodes includeBA14
Timescale2 to 4 hours for most hobs and ovens
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Thinking about hob and oven installation in Trowbridge?

A new kitchen layout in Trowbridge sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Families in Trowbridge adding a double oven may find the existing circuit is not rated for it, so planning the electrics early avoids a delay on fitting day. We cover all of Trowbridge, including the BA14 postcode district, and travel out to neighbouring towns across Wiltshire.

What is in a typical job?

After the survey visit we write the scope down. For hob and oven installation in Trowbridge it usually covers:

  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Old hob or oven disconnected safely and taken away for recycling

How much does hob and oven installation cost in Trowbridge?

These guide ranges include VAT at 20% and are adjusted for prices in the South West. We confirm your price in writing after a free survey visit. Costs in the South West sit close to the national guide.

How much does hob and oven installation cost in Trowbridge?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£120–£310
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£120–£260
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£150–£410
New gas pipe run to a new hob positionPipework, testing and making good£260–£820

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Local homes and their kitchens

In and around Trowbridge, homes range across thatched and stone cottages, Victorian railway terraces, post-war estate houses and new-build estates. Railway terraces in Swindon often have a narrow back kitchen, while stone and thatched cottages in the villages tend to have small kitchens with low ceilings.

Wiltshire's water is hard, much of it from chalk, so limescale on taps and boiling water taps is common and a filter can help. Village lanes and farm tracks can be narrow for delivery lorries, and Salisbury's historic centre has limited parking, so delivery is planned in advance.

What rules apply to hob and oven installation in Trowbridge?

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed thatched cottages, Salisbury's historic centre and other conservation areas may need consent for a new external vent or changes to historic features.

Practical advice for Trowbridge homeowners

  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Wiltshire can be cut correctly by the fabricator.
  • Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
  • If your Trowbridge home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.

Questions about hob and oven installation in Trowbridge

How much does hob and oven installation cost in Trowbridge?

Guide prices in Trowbridge are about £120 to £310 including VAT for connecting a gas hob to an existing supply. The final price depends on the size of the kitchen and what is moving, and is set out in an itemised written quote.

Can you measure up in Trowbridge before quoting?

Yes. Every quote starts with a free, no-obligation survey visit to your home in Trowbridge. We measure the room, check the walls, floor and service positions, then send an itemised written quote.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Who is allowed to connect a gas hob?

By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Hob and oven installation in neighbouring towns

Close to Trowbridge? We cover these nearby towns too:

Other kitchen work in Trowbridge

Free survey visit

Book a free survey visit in Trowbridge

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price