Kitchen Installers UK
0800 088 6341 Get a guide price

Hob and oven installation · England

Hob and oven installation in Kent

If you need hob and oven installation anywhere in Kent, we survey the kitchen, agree the scope with you and book every trade through to handover.

Guide price£140 to £920
Towns covered29 towns, including Maidstone
Timescale2 to 4 hours for most hobs and ovens
Get a guide price Book a free survey visit
A black induction hob set into a pale quartz worktop, with a built-in oven in a tall housing to one side

Is hob and oven installation right for your Kent kitchen?

A new kitchen layout in Kent sometimes puts the hob on an island or another wall, so gas pipework or a cooker circuit has to follow it to the new position.

Many households in Kent switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.

What does hob and oven installation in Kent include?

Here is what usually goes into hob and oven installation, adjusted to your Kent kitchen after we have measured it:

  • Appliance models checked against worktop cut-outs, oven housings and existing supplies
  • Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
  • Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
  • Induction and ceramic hobs wired to a suitable cooker circuit and tested
  • Built-in single and double ovens fixed into housings with their ventilation gaps
  • Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
  • Gas supply moved to a new hob position, with pipework tested and made good
  • Old hob or oven disconnected safely and taken away for recycling

How much does hob and oven installation cost in Kent?

As a starting point for Kent, these ranges include VAT at 20% and allow for typical labour costs in the South East. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.

How much does hob and oven installation cost in Kent?
Typical projectGuide price
Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested£140–£340
Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test£140–£290
Range cooker installedGas or dual fuel, levelled, stability bracket fitted£170–£460
New gas pipe run to a new hob positionPipework, testing and making good£290–£920

Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.

Kitchens in homes across Kent

Across Kent you will often find Victorian terraces, weatherboarded cottages, 1930s semis and oast house conversions, and each shapes the kitchen differently. Victorian terraces in the Medway towns and along the coast often have a narrow back-addition kitchen, while 1930s semis usually have a small kitchen beside a separate dining room.

Water across Kent is hard, so limescale builds up quickly on taps and boiling water taps, and a scale-reducing filter is worth considering. Seaside terraces, permit parking and narrow village lanes can each make deliveries slower, so the route for long worktops is best checked at the survey.

Many Victorian terraces have a narrow back kitchen that owners open into the dining room to make a family space. Oast and barn conversions can put the kitchen in an unusual room shape, which calls for careful planning of units, extraction and lighting.

Rules for hob and oven installation in Kent

In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.

Listed weatherboarded and timber-framed cottages, oast conversions and homes in conservation areas such as historic Canterbury may need consent for new external vents.

Before you start

  • Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
  • Follow the hood and hob manufacturers' instructions on the minimum distance between them; gas hobs usually need more clearance than induction.
  • Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
  • A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
  • Ask the Gas Safe engineer for a record of the work and keep it with your home documents, especially if you let a property in Kent.
  • Keep the hob's cut-out template and installation manual with the worktop plan, so a stone worktop for your kitchen in Kent can be cut correctly by the fabricator.

Questions about hob and oven installation in Kent

How much does hob and oven installation cost in Kent?

Hob and oven installation in Kent typically costs £140 to £340 including VAT for connecting a gas hob to an existing supply, based on prices in the South East. Larger or more involved jobs cost more, and your price is fixed in writing after a free survey visit.

Do you cover the whole of Kent?

Yes. We carry out hob and oven installation across Kent, including Maidstone, Gillingham, Chatham and Tunbridge Wells. Every job starts with a free survey visit and an itemised written quote.

Why does a range cooker need a stability bracket?

Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.

Does an induction hob need a new circuit?

Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.

Do built-in ovens need ventilation?

Yes. Built-in ovens release heat, and their installation instructions set the gaps and openings the housing must leave, often at the back or beneath the oven. Blocking them can overheat the surrounding units and the oven's own controls. An oven under the worktop and one in a tall housing have different requirements, so we check the instructions for your model before fitting.

Hob and oven installation in towns across Kent

Choose a town for local guide prices and postcode coverage:

Hob and oven installation in nearby areas

Free survey visit

Book a free survey visit in Kent

We measure up, check walls, floors and service positions, and send an itemised written quote. Or get a guide price online in about two minutes.

Get a guide price 0800 088 6341

Book a free survey visit

Tell us about the kitchen and the work. We will call to arrange a visit.

We use your details only to arrange your visit and quote. See our privacy notice.

Prefer to talk? 0800 088 6341

CallGuide price