Hob and oven installation · England
Hob and oven installation in West Sussex
Our hob and oven installation work covers the whole of West Sussex, including Crawley, Worthing and Bognor Regis.
Why do people in West Sussex choose hob and oven installation?
Many households in West Sussex switch from gas to induction when they refit, which can mean a new cooker circuit and the old gas supply capped off safely.
Some people in West Sussex buy a hob and oven online and need them fitted properly, with gas work by a Gas Safe registered engineer and electrics tested and certified.
What does hob and oven installation in West Sussex include?
The exact scope is agreed after the survey, but a typical job in West Sussex covers:
- Appliance models checked against worktop cut-outs, oven housings and existing supplies
- Laminate and wood worktop cut-outs made to the hob template; stone cut-outs by the fabricator
- Gas hobs and cookers connected and tightness tested by a Gas Safe registered engineer
- Induction and ceramic hobs wired to a suitable cooker circuit and tested
- Built-in single and double ovens fixed into housings with their ventilation gaps
- Range cookers levelled, with a stability bracket fitted to gas and dual-fuel models
- Gas supply moved to a new hob position, with pipework tested and made good
- Old hob or oven disconnected safely and taken away for recycling
How much does hob and oven installation cost in West Sussex?
Typical hob and oven installation prices for homes in West Sussex, including VAT and adjusted for the South East. Your own figure depends on the size of the kitchen, the layout and what is moving. Prices in the South East usually run above the national guide, mainly because labour and parking cost more.
| Typical project | Guide price |
|---|---|
| Gas hob fitted and connected by a Gas Safe registered engineerExisting gas supply in the right place, tightness tested | £140–£340 |
| Induction or ceramic hob fitted on a suitable circuitCut-out, connection and test | £140–£290 |
| Range cooker installedGas or dual fuel, levelled, stability bracket fitted | £170–£460 |
| New gas pipe run to a new hob positionPipework, testing and making good | £290–£920 |
Guide ranges cover fitting and connection to an existing suitable gas supply or cooker circuit, except the new gas pipe row; a new cooker circuit, alterations to stone worktops and the appliances themselves are priced separately. Prices include VAT at 20%.
Kitchens in homes across West Sussex
You will find 1930s semis, flint and brick cottages, post-war new town houses and seaside bungalows throughout West Sussex. Crawley's new-town houses often have a compact galley, while seaside bungalows in Worthing and Bognor Regis tend to have a small square kitchen beside the dining area.
West Sussex has mostly hard water, so limescale on taps, sinks and boiling water taps is common and a filter is worth considering. Coastal flats may have no lift, and village lanes on the edge of the Downs can be narrow for delivery lorries, so the delivery route is checked at the survey.
Seaside bungalow owners often open the kitchen into the dining room and refit it for easier everyday use. New-town houses tend to have small kitchens where taller wall units, integrated appliances and a better layout help make the most of the space.
Rules for hob and oven installation in West Sussex
In England, only a Gas Safe registered engineer may fit, connect or move a gas hob, cooker or gas pipework, and the installation is tightness tested afterwards. An induction hob often needs a dedicated cooker circuit; a new circuit is notifiable under Part P, so it is certified through a competent person scheme or building control. Connecting to an existing suitable circuit is not notifiable, but it must still meet BS 7671.
Homes in the South Downs National Park, listed flint cottages and conservation areas such as central Chichester may need consent for a new external vent.
Before you start
- If the new hob sits away from the existing gas supply, allow for a new pipe run by a Gas Safe registered engineer.
- Switching from gas to induction leaves a gas pipe that must be capped safely, so plan that with the Gas Safe engineer at the same visit.
- Measure the oven housing against the installation dimensions, including the ventilation gaps at the back or base that the manufacturer requires.
- A range cooker needs a level, firm floor and, for gas and dual-fuel models, a stability bracket so it cannot tip when the door is loaded.
- Confirm whether your new oven sits under the worktop or in a tall housing, because the ventilation and fixing requirements differ between the two.
- If your West Sussex home has an open-flued gas appliance, mention it at the survey, because any new extraction above the hob will need a spillage test.
Questions about hob and oven installation in West Sussex
How much does hob and oven installation cost in West Sussex?
For connecting a gas hob to an existing supply, budget around £140 to £340 including VAT in West Sussex. That reflects typical costs in the South East; we confirm the actual figure in writing once we have measured up.
Do you cover the whole of West Sussex?
Yes. We carry out hob and oven installation across West Sussex, including Crawley, Worthing, Bognor Regis and Littlehampton. Every job starts with a free survey visit and an itemised written quote.
Why does a range cooker need a stability bracket?
Because a range cooker can tip forward if weight is put on an open oven door, which could damage the gas connection or injure someone. Gas and dual-fuel models are secured with a stability bracket or chain to the wall or floor behind, as the manufacturer specifies, and the cooker is levelled on a firm floor so its doors close properly and pans sit flat.
Who is allowed to connect a gas hob?
By law, anyone who carries out gas work for payment must be on the Gas Safe Register, in Great Britain and Northern Ireland, and anyone working on gas must be competent to do it. We only use Gas Safe registered engineers, and we strongly advise against fitting a gas hob yourself. The engineer connects the hob, tests the installation for tightness, checks the burners and the room's ventilation, and leaves the appliance safe to use. You can ask to see the engineer's Gas Safe ID card before work starts.
Does an induction hob need a new circuit?
Often, yes. Many induction hobs draw more current than an ordinary socket circuit can supply, so they are wired to a dedicated cooker circuit from the consumer unit. If you already have a cooker circuit of the right rating, the hob can usually connect to it. A new circuit is notifiable in England and Wales, and everywhere it must be tested and certified to BS 7671.
Hob and oven installation in towns across West Sussex
Choose a town for local guide prices and postcode coverage:
- Hob and oven installation in Crawley
- Hob and oven installation in Worthing
- Hob and oven installation in Bognor Regis
- Hob and oven installation in Littlehampton
- Hob and oven installation in Horsham
- Hob and oven installation in Haywards Heath
- Hob and oven installation in Chichester
- Hob and oven installation in Burgess Hill
- Hob and oven installation in East Grinstead
- Hob and oven installation in Shoreham-by-Sea
- Hob and oven installation in Lancing
- Hob and oven installation in Midhurst